Panasonic JS-170FR Series Service Manual page 92

(10) Select the "Exit" menu by using [→] or [←] key on the keyboard.
Main Advanced Power
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
5) Starting from the screen of 4) above, move to "Exit" by means of the rightward arrow mark (→).
Confirm that "Exit Saving Changes" has been selected and press the [Enter] key.
A sub-screen is presented as shown below. Then, press the [Enter] key again.
Main Advanced
Exit Saving Changes
Exit Discarding
Load Setup Defaults
Discard Changes
Save Changes
If automatic restart occurs and a display of "Configuration Error" is presented select "continue" and
press the Enter key. Execute the procedures of 3) and thereafter.
PhoenixBIOS Setup Utility
Boot Exit
Space Select
PhoenixBIOS Setup Utility
Power Boot Exit
Setup Confirmation
Save configuration changes and exit now?
[Yes]
Space Select
3-8
Item Specific Help
Exit System Setup and
Save your changes to
CMOS
Enter Accept
Item Specific Help
Exit System Setup and
Save your changes to
[No]
Enter Accept