Table of Contents
Advertisement
2
Select and click on the indoor unit and the background color
of the indoor unit is changed to green. The operation status
of the selected indoor unit is displayed on the upper part.
Displayed items are as follow:
Selected indoor unit address
Error
Power
Temperature
Control
Mode Set
Fan Speed
Air Swing
Emergency Stop Status
Consult the installer to use the emergency stop function.
Refer to the installation manual for explanation about the
emergency stop.
MIM-Doo_IB_E_25059.indd
15
Displays the name of the selected indoor unit.
Displays whether there is an error on the selected
indoor unit.
Click on this button to turn on and turn off the selected
indoor unit.
The current temperature of the selected indoor unit can
be monitored and the desired temperature can be set by
clicking the
and
buttons next to the desired
temperature.
The current mode of the selected indoor unit is displayed
in light blue. Click on the desired mode to change modes.
The current fan speed of the selected indoor unit is dis-
played in light blue. Click on the desired fan speed to
control the fan speed.
The current air swing of the selected indoor unit is
displayed in light blue. Both air swings can be selected at
once. Click on the desired air swing to control the airflow.
The button is displayed in red if the DMS is currently in
the emergency stop status. In the emergency stop status,
the indoor units may be monitored but not controlled.
(The emergency stop function can only be used when the
external contact control of the DMS is used.)
15
E-
2006-03-21
ｿﾀﾈﾄ 7:34:51
Advertisement
Table of Contents
