Flip Video Camera Quick Start Manual

Flip Video Camera

Quick Start Guide

http://www.theflip.com/
Front
Recording
lens.

Connecting to a Computer

1. Make sure the Flip is off.
2. On the side of the Flip (left side when
viewed from the back, right side when
viewed from the front), slide the latch down
to release the USB connector arm.
3. Insert the connector into a USB port on your
computer.
Note: It is recommended you use a USB extension cable
if there is not enough space for your camera.
For assistance, go to http://www.theflip.com/support_home.shtml
Flip Camera Features
Recording Video screen.
microphone.
Press to view
recordings.
Slide down to
release USB
connector arm.
Starting the Flip Video Program
1. Follow the instructions under "Connecting to a
Computer."
2. To start the program:
Mac: Double click the FLIPVIDEO icon on your desktop,
and double click Start Flipshare.
PC: Click View your Flip Camcorder Videos using the
program on device in the pop-up dialog box, and click
OK.
3. The Flip Video Program will
appear with your recorded videos
previewed in the right screen.
Note: The program runs directly from your Flip camera,
it can only be used when the Flip is connected to your
computer.
™
Back
Slide down to
turn camera on
and off.
Press to delete
and confirm
video deletion.
Record and pause.