Pip (Picture-In-Picture); On/Move; Freeze; Swap - JVC AV 27150 User Manual

28 Button Functions - PIP

PIP (Picture-In-Picture)

PIP displays two separate pictures on screen.
Your television has 2-Tuner PIP, meaning you can
view pictures from two different channels
simultaneously. A special set of PIP control buttons
are located on the upper part of the remote
control. Descriptions of each button appear on this
page.
Note: PIP is available on the following models
only: AV-36150, AV-35115, AV-32150, AV-27150.
O /M
N OVE
Turn PIP on by pressing the O
(PIP) O /M
N OVE
02
E to turn PIP off
XIT
Once PIP is turned on, you can move the PIP
window to any of the TV's main picture's four
corners with the O
N
O /M
N OVE
• Each press of O
N
to a different corner.
NOTES:
• In order for PIP to work, the television must be set to "TV mode". If you play a videotape, your TV will switch to "VCR
mode". The TV only sees one signal in VCR mode. In order to use PIP, press the TV/VCR button to return to TV Mode.
1
• The PIP window is /
• PIP will not display blocked channels or programs. A blue screen will display instead.
/M button.
N OVE
07
/M button.
OVE
/M will shift the PIP window
OVE
the size of the full screen.
9
F
REEZE
Use the F button to lock a single, still image
REEZE
onto the PIP window.
F
REEZE
• If PIP is off when F
REEZE
of the main screen is taken and placed in the
PIP window.
• If PIP is on when F
REEZE
in the window when the button was pressed is
held.
S
WAP
You can exchange the channel displayed on the
main screen for the one shown in the PIP window
by pressing S .
WAP
S
WAP
C +/- For PIP
HANNEL
Like the main C
HANNEL
for PIP lets you scan through the channels in the
PIP window.
C +/-
HANNEL
• Direct channel selection with the 10 key pad for
PIP is not possible.
S

OURCE

You can select the signal source for the PIP
window image.
S
OURCE
• If the PIP tuner does not have a signal, the PIP
window will be blue.
is pressed, a snapshot
is pressed, the image
+/- buttons, C +/-
HANNEL