Auto Tuner Setup - JVC AV 20320 User Manual

Auto Tuner Setup

If you have already run the Auto Tuner as part of the quick setup earlier in this guide,
please skip ahead to "Channel Summary" to continue setting up your television.
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the C
HANNEL
Press the M
ENU
To AUTO TUNER SETUP
To operate
To choose CABLE or AIR
To move to START
To start Auto Tuner Setup
Programming will take approximately 1 to 2
• Noise Muting will not work during Auto Tuner Setup.
NOTE:
• Some cable systems experience interference from radio frequencies on cable Channel 95.
You may delete this channel from your scan by removing the "X" next to it on the Channel
Summary screen shown on the next page.
+/– buttons) you will receive only clear, active channels.
button
NOW
PROGRAMMING !
48
minutes.
PROGRAMMING OVER!
Initial Setup
19