Motorola MC9500-K Quick Start Manual

FEATURES
MC9500-K
9
Quick Start Guide
10
11
12
1
2
3
1 Up/Down Volume Button 6 Microphone 9 Decode LED
2 Scan Button 7 Scan Button 10 Receiver
3 Function Keys 8 Touch Screen 11 Battery Status LED
4 Power Button (with screen protector) 12 WAN Radio Status
5 Keypad LED
Note 1: To warm boot the MC9500-K, press and hold the Power button
for five (5) seconds.
To cold boot the MC9500-K, press and hold the 1, 9 and Power button.
KEYPADS
13 Speaker 18 IrDA Window 21 Headset Connector
14 Camera and Flash 19 Action Button 22 Handstrap
15 Interface Connector 20 Scan Button 23 Battery Release Buttons
16 Stylus 24 Battery
17 Scan Exit Window
8 23
24
(see Data Capture Options)
7
13
23
14
22
6
15
5
16
21 Telephony Numeric
4
20
19
17
18
LED Notifications
Battery Status:
Slow blinking amber: Healthy battery charging
WAN Radio Status:
Slow blinking red: unhealthy battery charging
Flashing green:
WAN activity Solid green: Fully charged healthy battery
Solid red: Fully charged unhealthy battery
Fast blinking amber: Charging error
Decode
Decode:
Battery Status
Red: Scanning active
WAN Radio
Green: Good decode
Status
Red (after Power button
Alpha Numeric
press): Safe to remove
battery
GETTING STARTED
1 2
SIM Card Installation (MC9596-K Only) microSD Card Installation
1. Press the Power button to suspend the
1. Press the Power button to suspend
MC9596-K.
the MC9500-K.
2. Wait for red Decode LED to turn on and 2. Wait for red Decode LED to turn on and
then turn off.
then turn off.
3. Unhook handstrap.
3. Unhook handstrap.
4. Press battery release buttons and
4. Press battery release buttons and
remove battery.
remove battery.
5. Remove SIM cover using flathead
5. Remove SD card cover using
screwdriver.
flathead screwdriver.
6. Slide SIM card holder to the left.
6. Slide microSD card holder to
Calculator Numeric
7. Lift card holder. the left.
8. Insert SIM card into SIM holder. 7. Lift card holder.
NOTE : 8. Insert microSD card into holder.
The proper position of the SIM card—the card
NOTE :
connector (i.e., gold area) should be facing
The proper position of the microSD card —
down with the beveled edge facing up.
the card connector (i.e., gold area) should
9. Lower the SIM card holder down. be facing outward with the notched edge
facing away.
10. Slide SIM card holder to the right to lock
into place. 9. Lower the microSD card holder
11. Reinstall SIM cover. down.
10. Slide card holder to the right
12. Reinstall battery.
to lock into place.
13. Connect handstrap.
11. Reinstall SD card cover.
14. Warm boot the MC9596-K.
12. Reinstall battery.
13. Reconnect handstrap.
14. Warm boot the MC9500-K.
Alpha Primary
3 4
Insert the Battery Charge the MC9500-K
24 hr*
Single Bay Cradle
1
2
Four Bay Cradle (with optional guide cups)
Battery Status LED
Charge Level Indicator
Battery Status Button
Battery Indications
Press the Battery Status button. MC9500-K Battery Status LED
Charge Level Indicator displays
Slow Blinking Amber = Healthy battery charging
approximate battery level.
Slow Blinking Red = Unhealthy battery charging * It is recommended that this
product be charged for 24
Solid Green = Healthy battery fully charged
hours before the first use to
Fully Partially Un-
Solid Red = Unhealthy battery fully charged
ensure that the internal
Charged Charged healthy
Fast Blinking Amber = Charging error battery is fully charged.
5
Charge the Battery
Single Slot Spare Battery Charger Four Slot Battery Charger
Battery Status LED (in charger)
Slow Blinking Amber = Healthy battery charging
Slow Blinking Red = Unhealthy battery charging
Solid Green = Healthy battery fully charged
Solid Red = Unhealthy battery fully charged
Fast blinking Amber = Charging error
Battery Status Indicator
Charge Level Indicator
Battery Status Button
Stand-alone Mode
Press the Battery Status button.
Battery Status LED
Solid Green = Healthy battery
Solid Red = Unhealthy battery
Battery Indications
Charge Level Indicator displays approximate
battery level.
Fully Partially Un-
Charged Charged healthy