Setting The Default Paper Size - Konica Minolta Bizhub 20p Service Manual

1.1

Setting the default paper size

bizhub 20P is the dedicated PCB, it is not necessary to set the default paper size.
(1) Open the "bizhub" folder and double-click the BrUsbsn.exe to start. On the model menu,
select the Printer 2 and bizhub 20P.
(2) Drag "s5200E (A4)" or "s5200U (Letter)" and drop it onto the BrUsbsn.exe screen.
When the Status LED of the printer lights up for an instant and goes off immediately
after dropping it, the setting is completed. Then, set the serial number following the
steps described in the next section.
Refer to the following step to set the serial number.
8-2
Confidential