Setting up and connecting
Before initial use
The following transportation protections are attached to the device:
–
–
–
–
–
■
Remove all packaging material and all transport protection from the device.
■
Release the turntable's transport protection by tightening the
Electrical connection
Observe the following electrical connection for safe and failure free operation of
the device:
■
Before connecting the device compare the connection data (voltage and
frequency) with that on the rating plate of your electric supply. This data must
agree in order to avoid damaging the device.
■
Make sure that the power cable is not damaged and is not laying over hot
surfaces and/or sharp edges.
■
The connection cable must not be stretched tight.
Connection to an external amplifi er
Connect both cinch plugs of the LINE-OUT connection cable
input of an external amplifi er. For this follow the operating instructions for the
external amplifi er.
USB Record Player KH 2430
Plastic band for holding down the pick-up arm
Transport screw
for securing the turntable
9
Protective cover for the needle
Styrofoam blocks
Information sheet for the turntable
transport screw
.
9
to the AUX
16
13
GB