Page 1
GD-171 GD-191 Please read this manual thoroughly before use, and keep it handy for future reference. European Union only European Union only FCC NOTICE LCD MONITOR LCD MONITOR LCD MONITOR LCD MONITOR User User User’s s s s Guide User...
Page 2
CAUTION: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
SAFETY INSTRUTIONS 1. Read all of these instructions. 2. Save these instructions for later use. 3. Follow all warnings and instructions marked on the product. 4. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Page 4
SAFETY INSTRUTIONS If the product exhibits a distinct change in performance, indicating a need for service. 15. The Main Plug is used as the disconnect device. Make enough room for inserting and removing the power plug. Place the apparatus as close to the outlet as possible. 16.
Page 5
▶ ▶ ▶ ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel. ▶ ▶ ▶ ▶ DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home.
Page 6
POWER CONNECTION The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada) and AC 220 – 240 V (For European countries, Asian countries, and United Kingdom). The power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure safety and EMC regulations of each country.
Remove the package cover and place the product on a flat and secure surface or in the installation location. Check whether all the flowing device and accessories are included with the main system. TFT-LCD MONITOR AC POWER ADAPTOR Warranty Card - 8 - USER MANUAL POWER CORD...
REAR PANEL CONTROL 1. DC 12V Power IN 2. RGB IN RGB signal input 3. VIDEO 1(AV1) IN Composite signal input for AV1 4. VIDEO 1(AV1) OUT Composite looping output for AV1 5. VIDEO 2(AV2) IN Composite signal input for AV2 6.
KEY FUNCTIONS 1. MENU Activates and exits the OSD. 2. SOURCE/▼ Select input source, and move the OSD menu. 3. AUTO/▲ Move the OSD menu and auto adjustment of RGB source. 4. ◀ ◀ ◀ ◀ (VOL) Decrease the level of volume and select and set the OSD menu. 5.
OSD MENU DESCRIPTION MENU SELECTION 1. Press the MENU button to access the Main menu. 2. Use the arrow buttons to highlight a selection. 3. Press the button to select an item. 4. Use the arrow buttons to highlight a selection. ◀...
1. Press the MENU button and then ▲/▼ button to select the PICTURE menu. 2. Press the ▶ button and then ▲/▼ button to select the adjustment item you need. 3. Press the ▶ button to active the item. ex) If you select the BRIGHTNESS, then the below picture appears on the bottom of screen. 4.
Page 13
■ RGB SETUP MENU 1. Press the MENU button and then ▲/▼ button to select the RGB SETUP menu. 2. Press the ▶ button and then ▲/▼ button to select the adjustment item you need. 3. Press the ▶ button to active the item. 4.
Page 14
1. Press the MENU button and then ▲/▼ button to select the FUNCTION menu. 2. Press the ▶ button and then ▲/▼ button to select the adjustment item you need. 3. Press the ▶ button to select the item. 4. Press the MENU button to move to the previous menu. LANGUAGE: Select the language: ENGLISH, FRANCE, GERMAN, ITALIAN, SPANISH.
SPECIFICATIONS VIDEO Screen Size Viewing Area Pixel Type Max. Resolution Pixel Pitch Brightness Contrast Ratio Aspect Ratio Viewing Angle (H/V) Display Color Response Time Video System Frequency (H) Frequency (V) Panel Lamp Life MECANICAL Outline Dimension W x H x D Net Weight (Without stand) Outline Dimension...
D-SUB CONNECTOR PIN ASSIGMENTS PIN ASSIGNMENT Pin No. Pin Name RED VIDEO GREEN VIDEO BLUE VIDEO GROUND RED GROUND GREEN GROUND BLUE GROUND TROUBLESHOOTING GUIDE Troubleshooting No picture The screen is too light or to dark The screen size will not fit for the PC input Strange colors using the PC input ⓒ...