Walbro Wvf-7P Carburetor - VESPA GT 200 Workshop Manual

10.11.8.2

Walbro WVF-7P Carburetor

To disconnect the carburetor from the engine, it
-
is necessary to move the air filter and remove
the throttle
connection, the clamps fastening the carburetor
to the filter box and the intake manifold, the
pipe supplying air to the membrane, and the
inlet connection.
Pull off the carburetor and rotate it to remove
-
the screw with the water connection complete
with pipes.
Note: This operation
emptying the cooling system. It is also necessary
to disconnect the cut-off vacuum supply pipe.
Remove the protection, the clamp and the
-
automatic choke device after releasing the
screw shown in the figure.
Remove the clamp and the cap with the
-
membrane chamber filter.
cable, the automatic
is necessary
choke
to avoid
197