JVC 0509SKH-SW-MT Instructions Manual page 17

Using the search code function
This function searches through the codes one by one, beginning from the
first code in the list.
1
Turn on the device manually.
2
Switch the remote control mode to a mode that matches
your device.
Press to select the mode.
3
Activate the search code function.
Hold down and
4
Point the remote control at your device and press
there is no response, try the next code by pressing
press again. Repeat the process until your device
turns off.
5
Press to register the code.
The code is now set. Confirm that the mode indicator goes
out.
If your monitor's remote control still does not work even after using the
search code function, use your device's own remote control. Some
models of JVC devices cannot be operated with this remote control.
until the mode indicator blinks.
Display top
menu
. If
and
TOP MENU
DISPLAY
MODE
LCD
Button functions
Change the remote control mode
Turn on/off the device
Navigate the menus
Select
Display menu
OK
Back to
DISPLAY
previous menu
Playback / Record, etc.
Select a
MODE
chapter
Stop
Pause
Record
Mute Press " "
g
Volume Press " "
g
Select a surround mode Press "
g
Depending on your device, some functions may not
be operable with this remote control.
Play
Forward
Rewind
"
16