Car Seat Adaptor; Double/Twin Upper/Lower Position; Fitting And Removal Of Maxi-Cosi Infant - iCandy peach Instruction Manual

Section 4
1. Car Seat Adaptors
(Sold separately: To affix Maxi-Cosi Infant
Carrier Car Seat).
Useful tip: New products are sometimes
stiff to engage and operate.
recommend ALL adaptors and connector
parts be lightly lubricated with a silicone
based furniture polish. This is best
achieved by spraying polish onto a soft
cloth and applying to relevant parts.
Single position. Fitting of main elevator
adaptors: Fit and press down into chassis
sockets ensuring adaptor latches and
locking tabs are flush with hub slots before
use.
Double/twin upper position: Fit and press
down into upper position of 'Blossom'
converter frame ensuring it latches
securely.
note: The adaptor legs are grooved to
prevent incorrect orientation when fitted to
the 'Blossom' converter frame.
Double/twin lower position: (Coded
yellow) Fit and press down into lower
position of 'Blossom' adaptor frame
ensuring it latches securely.
note: The adaptor legs are grooved to
prevent incorrect orientation when fitted to
the 'Blossom' converter frame.
iCandy peach
We

Fitting and removal of Maxi-Cosi infant

Carrier Car Seat: Affix car seat onto the
located adaptors, ensuring it latches
securely. To remove; depress both grey
side buttons and pull upwards.
16. Warning
Check that the car
seat is correctly engaged before use.
removal of car seat adaptors:
Main/upper position: Depress lower
section of the large black centre button
until adaptor 'jumps up' before removing.
Lower position: Push across latching lever
allowing adaptor to 'jump up' before lifting
out.
17. Warning
Do not use car seat
in lower position without main seat
unit or car seat fitted to upper
position.