Flarm Update Procedure; Uploading Obstacles - LXNAV LX9000 User Manual

LX9000 Version 2.6
9. Above/below LED is red when warning is raised.
10. 018°, 054°, 324° and 288° green and red flashing, obstacles in front.
11. Check functionality of mode key; each short press will activate audio for a short
time.
After installation you must verify the above functionality items 2, 3 and 11.

10.1.3 Flarm Update Procedure

The Flarm is updated via the SD card. From the Flarm web (www.flarm.com) Support /
Updates page download the appropriate file and copy to the SD card (e.g. flarm_407.fw).
Enter password 89891 and select the Flarm update file. Wait until it is completed.
In case of a problem it is still possible to perform an update using FLARMtool and the serial
connection. Please refer to an older LX8000 manual for the detailed procedure.

10.1.4 Uploading Obstacles

Also updating Flarm obstacles has been simplified in LX9000 version 2.2. Obstacles are
updated via the SD card.
alps20090727_.obs) and copy it to the SD card.
In the Files and Transfer menu select the Update Databases menu item. Select the
obstacle file and wait until the update completes.
Go to the Flarm webpage, download the obstacle file (e.g.
Page 116 of 130
September 2011