Page 1
Purification System CLI-AP30 | Installation & Operating Instructions...
Page 2
PO Box 81 Findon SA 5023 Australia Telephone: 08 8354 0711 Facsimile: 08 8354 0722 Electrical Requirements: Email: aquaport@aquaport.com.au Australia / New Zealand 240V / 230V 50Hz Web: www.cli-mate.com.au Due to manufacturing alterations product may Social: /climatebrand @climatebrand vary slightly from the pictured.
SAFETY PRECAUTIONS • Keep the rear air inlet and outlet is free from air blocking materials such as clothing, plastic bags or papers. Air flow is Read all instructions carefully. required for the unit to operate effectively. • All components need to be installed in accordance with the user •...
PRODUCT FEATURES Ionizer In addition to the filters, this air purifier generates negatively Filters charged oxygen molecules (different than ozone) which attach to The 3 layer filter contains a pre-filter, a HEPA filter and an activated particles in the air which makes it easier for the air purifier to trap. carbon filter.
CONTROL PANEL/BUTTONS REMOTE CONTROL 1. Speed options On/off Allows selection for desired speed setting- turbo, high, low and II. Child-safety lock sleep. Default setting at low speed III. Auto-mode Filter timer reset button IV. Speed options Press and hold for 3 seconds to reset filter timer V.
DISPLAY PANEL 1. Power Indicator Illuminates blue when power is ON Filter Change Indicator Light will flash blue when filter needs to be changed Child-Lock Function Indicator Illuminates Green when Child Safety Lock is ON 2. Fan Speed Indicator Turbo speed High speed Low speed Sleep (Ultra-quiet mode)
OPERATION INSTRUCTIONS Air Purifier 1. Plug unit into power socket, unit will beep and control panel Model Code CLI-AP30 lights will illuminate blue before extinguishing. POWER light Dimensions (mm) H679 x W394 x D153 will be lit green. Unit is now in standby mode.
Page 9
Good air quality Moderate air quality Poor air quality Indicator Blue Purple light Operating Sleep High speed 6. To activate CHILD-LOCK function, press on the remote control. ‘CHILD LOCK’ light on the unit will be lit when this feature is activated. This function will lock the control buttons on the unit and remote control Note: To deactivate the CHILD LOCK function, hold the button on the remote control for 3 seconds until the CHILD LOCK...
CLEANING AND MAINTENANCE CLEANING THE PRE-FILTER Before carrying out any maintenance or cleaning of the unit, make It is recommended that the Pre-filters (the removable white layer) sure that the power to the unit is turned off and power cord is are cleaned every 1-2 weeks of unit operation, depending on the unplugged from the power socket.
CLEANING THE HEPA AND ACTIVATED CARBON FILTER REPLACING FILTER It is recommended that the HEPA and activated carbon filters are When the lifespan of the 3-layer filter reaches it end, the POWER cleaned every 100-500 hours of unit operation, depending on the light will flash blue, indicating that it needs to be changed.
Page 12
TROUBLE SHOOTING BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST. Problem Possible Causes What To Do No Power 1. Unit is not plugged into wall socket. 1. Check connection to wall socket. 1. Air ventilation around unit 1.
Page 13
Problem Possible Causes What To Do 1. Battery could be dead, depleted or not 1. Replace battery. Ensure the battery is correctly installed correctly installed The remote control does 2. Aim the remote at the small square in the middle of the not work 2.
Page 14
Warranty does not cover filters which are consumable unless proven to www.cli-mate.com.au/warranty-and-registration have defects in material or workmanship in the manufactured product. Our goods come with guarantees that cannot be excluded under Aquaport Corporation Pty Ltd the Australian Consumer Law.
Page 15
INSTALLATION AND OPERATING INSTRUCTIONS 13...
Need help?
Do you have a question about the CLI-AP30 and is the answer not in the manual?
Questions and answers