Temperature Regulator In Refrigerator Chamber; Changing Light Bulb - Hisense HR6TFF270 User's Operation Manual

vegetables losing moisture. The controlling knob on the cover can be used to regulate the
humidity in the drawer, set the knob at "more humidity", less moisture loss; set the knob at "less
humidity", more moisture loss.
Door bin of refrigerator chamber
It is suitable for storage of eggs, canned liquid, bottled liquid and packed food, etc. Before you
take the food out, please lift up the door bin cover vertically, and do not place too many heavy
things in the bin.

Temperature regulator in refrigerator chamber

Insufficient refrigeration in chamber.
Set the temperature controller at "Colder".
Using the refrigerator in normal.
Set the temperature controller at "Mid".
Notice: Do not place the food on the air outlet,
and leave spaces for airflow.
Important!
High ambient temperatures (e.g. on hot summer days) and a colder setting on the temperature
regulator can cause the compressor to run continuously or even non-stop!
Reason: when the ambient temperature is high, the compressor must run continuously to
maintain the low temperature in the appliance.
Changing the Light Bulb
Warning!
If the lightbulb requires replacing you may do so yourself - please note that if your not confident of
performing this task, it is best not to attempt it thus avoiding any hazard or harm - please contact
our service hotline on 1800447367 for information.
Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit
breaker.
Use a phillips head screw driver to take the screws out..
Remove the light cover by pushing down the two bottom ends of the plastic
cover and draw up the cover.
Unscrew the bulb.
Replace with a 10 watt-refrigerator bulb that is of the same shape and size.
Replace the light bulb cover.
The method of changing the light bulb on the left side and the right side is the
same.
7