Samsung TV Manual page 111

HDMI Black Level
●
This is available only for video input via an HDMI cable. Use this to reduce image retention that
may occur when watching video from an external device. Choose one of the black levels.
Film Mode
●
Optimizes the picture quality for movies. Select the mode for watching movies. This feature is
only available when watching TV or when the input signal is AV, Component (480i, 1080i), or
HDMI (1080i).
Try Now
Motion Plus
●
Removes blurring and judders from scenes with rapid movement. If you select Custom, you can
configure the after image and screen trembling removal ratio and you can view a sharper image
LED Clear Motion
through the
"
The Info screen on your TV displays the resolution and frequency of the incoming signal (60Hz), but
not the frequency the TV is generating for the image it is displaying by using
"
If noise occurs on the screen, please set up the
Blur
set up the
Blur Reduction: Adjusts the blur reduction level from video sources.
–
Judder Reduction: Adjusts the judder reduction level from video sources when playing films.
–
LED Clear Motion
–
picture.
Reset: Reset the custom settings to the factory defaults.
–
"
Motion Plus
While
and frequency of the incoming video signal (60Hz). The displayed frequency is not the same as the
frequency of the picture the TV is displaying when Motion Plus is activated.
Analog Clean View
●
This function reduces diagonal noise in the picture caused by signal crosstalk (interference). If
your TV picture displays diagonal noise or distortion when you watch, turn on this function.
Cinema Black
●
In Movie mode, this feature dims the top and bottom areas of the video image to provide a more
immersive viewing experience. This feature is only available for LED TVs.
Black Optimiser
●
This feature is only available for PDP TVs.
Adjust overall black colour depth to give a change to picture depth. This is not available when
playing a media file or using the TV as a computer display.
function.
Reduction, Judder Reduction,
: Removes drag from fast scenes with a lot of movement to provide a clear
is running, select the Virtual Remote panel's
Motion Plus to Off. If
LED Clear Motion
and
INFO
Motion Plus
Motion Plus is Custom, you can
Reset
manually.
button to display the resolution
Try Now
function.