Bosch DCN Next Generation Installation And Operation Manual page 222

222 en | Configuration
Menu f
Menu f sets a language to a specified channel. The number of channels to which a language
can be set is the same as the number of channels set in menu d. The language list is set for all
interpreter desks in the system.
If a language is set to a channel, an asterisk appears in the display. For example:
Menu g
Menu g sets a channel number to output A. The channel number must be available on the
interpreter desk. It is necessary to set each interpreter desk in turn.
NOTICE!
When you install the interpreter desk for the first time, the interpreter booth number is the
default channel number for output A.
Menu h
Menu h sets a channel to output B of the interpreter desk. It is necessary to set each
interpreter desk in turn. Output B can be set either for none or all available channels.
Menu j
Menu j sets the number of auto-relay interpreter booths in the system. The number is set for
all interpreter desks in the system.
Menu k
Menu k sets the interpreter booths that are auto-relay booths. The interpreter booths are set
for all interpreter desks in the system.
DCN-NG_IOM_V4.1 | V1.3 | 2012.07 Installation and Operation manual
Conference System
Bosch Security Systems B.V.