Do you have a question about the 10HM8000 and is the answer not in the manual?
Questions and answers
Mindy Phillips
February 20, 2025
Can you change heater from Celsius to fahrenheit?
2 comments:
Mr. Anderson
February 20, 2025
Yes, the Duraflame 10HM8000 heater can be changed from Celsius to Fahrenheit. Pressing and holding the POWER button on the control panel for 3 seconds will switch between °F and °C.
Page 1
MODELS/ MODELES/ MODELOS: 10HM8000, 10HM2273, 10HM4128, 10HM1342, 10HM4126, 10HM2274, 10HM4124 INSERT MODEL/ INSERT MODELES/ INSERT MODELOS: 10QI071ARA Français P.10 Español P.18 www.tsicustomerservice.com Twin-Star International, Inc; Delray Beach, FL 33445 Made in China • Printed in China • Fabricado en China • Impreso en China • Fabriqué en China • Imprimé en Chine REV-0 www.tsicustomerservice.com...
GETTING STARTED 1. Remove the product indentification sticker from the front of the insert Product Identification Sticker 2. Attach the Product Identification Sticker to the Manual below for future reference. This information is used for product registration and also is nessessary for customer service. Attach Product Identification Sticker Here 3.
IMPORTANT INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. Read all instructions before using this appliance. 2. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance.
OPERATION INSTRUCTIONS Display Control Panel The heater can be operated by either the remote control or the control panel. Power Timer Temperature REV-0 www.tsicustomerservice.com...
OPERATION INSTRUCTIONS FUNCTION ICON DESCRIPTION The POWER button supplies power to all the functions of POWER the heater. Pressing the POWER button again the heater will be put in standby mode. Pressing and holding the POWER button on the control panel for 3 seconds will switch between °F and °C.
TROUBLE SHOOTING Problem Root Cause Corrective Action Clean or replace filters. Dirty filters Periodic cleaning/vacuuming of the filter is recommended. Perform a master reset; turn off and unplug unit. Hold down main power button on the unit itself. Continue to hold button down Heater does not blow warm while plugging unit back in.
EXPLODED VIEW Part Part Name Control panel circuit board Infrared Element Main Circuit Board Power Cord Filter Filter Cover Blower Caster Remote Control Touch-up Pen Note, the scale and size of your parts may be different depending on your exact model REV-0 www.tsicustomerservice.com...
FCC/IC INFORMATION NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:...
3-YEAR LIMITED WARRANTY The manufacturer warrants that your new Electric Heater is free from manufacturing and material defects for a period of three years from date of puchase, subject to the following conditions and limitations. 1. Install and operate this Electric Heater in accordance with the installation and operating instructions furnished with the product at all times.
Need help?
Do you have a question about the 10HM8000 and is the answer not in the manual?
Questions and answers
Can you change heater from Celsius to fahrenheit?
Yes, the Duraflame 10HM8000 heater can be changed from Celsius to Fahrenheit. Pressing and holding the POWER button on the control panel for 3 seconds will switch between °F and °C.
This answer is automatically generated
@Mr. Anderson thanks!
What does beeping indicate