Log-In/Log-Out Commands - Carrier Access Wide Bank 28 DS3 Overview

Log-In/Log-Out Commands

Log-In/Log-Out Commands
1. Activate User (Log In)
NOTE:
To simplify new installations, units are normally shipped with log-in security turned
off unless the customer requests that it be turned on. When security is turned on, the default
user name is ADMIN and the default password is either null or TEST.
ACT-USER:tid:uid:ctag::pid;
Keyword
pid
uid
Example:
NOTE:
If user's name and password are valid, a normal COMPLD response will appear.
Following each login, the Wide Bank automatically retrieves the current equipment
configuration (RTRV-EQPT) to display the installed cards and their present status, as shown
below.
Response:
10
Description
Private ID (password). An ASCII string up to 10 characters long with at least
two non-alphabetic characters with at least one special character. Omit if no
password is required. Passwords are case-sensitive
User ID (name). An alphanumeric string up to 10 characters long.
ACT-USER:tid:JOHNDOE:ctag::SECRET-1;
tid 2001-12-18 15:13:21
M ctag COMPLD
;
tid 2001-12-18 15:13:21
A 1 REPT EQPT
"DS3-A:ACTIVE,2.40.0"
"DS3-B:STANDBY,2.40.0"
"DS1-CARD-1:ACTIVE,"
"DS1-CARD-2:ACTIVE,"
"DS1-CARD-3:ACTIVE,"
"DS1-CARD-4:ACTIVE,"
"DS1-CARD-5:ACTIVE,"
"DS1-CARD-6:ACTIVE,"
"DS1-CARD-7:ACTIVE,"
"DS1-CARD-SPARE:ACTIVE,"
;
Wide Bank 28 DS3 - Release 2.4