Do you have a question about the MINI MAX and is the answer not in the manual?
Questions and answers
jason mottesheard
February 7, 2025
Can this be hard wired into the OSB port and simply used for gauges
1 comments:
Mr. Anderson
February 11, 2025
Yes, the H&S Mini Maxx can be powered directly from the OBD II port, which provides a constant 12V+ power supply. However, in this setup, the Mini Maxx will not turn on and off with the ignition. Instead, there is a switch on the OBD II adapter plug to manually turn the Mini Maxx on and off.
This answer is automatically generated
Zach
February 24, 2025
Need update for 2003-2007 ford 6.0L powerstroke
Doesn't download. VXHB4B3.HEX
Need help?
Do you have a question about the MINI MAX and is the answer not in the manual?
Questions and answers
Can this be hard wired into the OSB port and simply used for gauges
Yes, the H&S Mini Maxx can be powered directly from the OBD II port, which provides a constant 12V+ power supply. However, in this setup, the Mini Maxx will not turn on and off with the ignition. Instead, there is a switch on the OBD II adapter plug to manually turn the Mini Maxx on and off.
This answer is automatically generated
Need update for 2003-2007 ford 6.0L powerstroke Doesn't download. VXHB4B3.HEX