Sony BVM-F250 Operation Manual page 107

HDMI HDMI (×1)
HDCP correspondence, Deep Color
correspondence
Signal format
See "HDMI/DisplayPort" (page 119)
of "Available Signal Formats".
DisplayPort DisplayPort connector (×1)
HDCP correspondence, 18/24/30bpp
(bits per pixel) correspondence
Signal format
See "HDMI/DisplayPort" (page 119)
of "Available Signal Formats".
Option port Four (4) ports
Signal format
See "Available Signal Systems"
(page 113) and "Available Signal
Formats" (page 114).
Parallel remote D-sub 9-pin (female) (×1)
Serial remote (LAN)
Ethernet (10BASE-T/100BASE-TX),
RJ-45 (×1)
Output
SDI BNC (×1) (monitor output)
Output signal amplitude:
800 mVp-p±10%
Output impedance: 75 ohms unbalanced
Transmission distance
3G-SDI: 70 m max.
HD-SDI: 100 m max.
SD-SDI: 200 m max.
Note
The signal from the monitor output
connector does not satisfy the ON-LINE
signal specifications.
3) When using the 5C-FB coaxial cable made by
Fujikura Ltd. or equivalent
4) When using the 5C-2V coaxial cable made by
Fujikura Ltd. or equivalent
DC 5V OUT Circle 4-pin (female) (×1)
General
Power requirements
100 V to 240 V AC,
1.6 A to 0.8 A, 50/60 Hz
Power consumption
Approx. 145 W (max.)
Approx. 72 W (average power
consumption in the default status)
Inrush current (1) Maximum possible inrush current at
initial switch-on (Voltage changes
caused by manual switching):
53 A peak, 17 A r.m.s. (240V AC)
Operating temperature
Operating humidity
Storage/transport temperature
Storage/transport humidity
Operating/storage/transport pressure
Mass
Supplied accessories
Optional accessories
3)
3)
4)
Design and specifications are subject to change without
\
notice.
(2) Inrush current after a mains
interruption of five seconds (Voltage
changes caused at zero-crossing):
39 A peak, 6 A r.m.s. (240V AC)
0 °C to 35 °C (32 °F to 95 °F)
Recommended: 20 °C to 30 °C (68 °F to
86 °F)
0% to 90% (no condensation)
–20 °C to +60 °C (–4 °F to +140 °F)
0% to 90%
700 hPa to 1060 hPa
Approx. 13.0 kg (28 lb 11 oz)
AC power cord (1)
AC plug holder (1)
Bracket (1)
Operation Guide (Japanese/English) (1)
CD-ROM (1)
BKM-16R Monitor Control Unit
BKM-37H/BKM-38H Controller
Attachment Stand
SMF-700 Monitor Interface Cable
BKM-220D SDI 4:2:2 Input Adaptor
(with serial number 2100001 or
higher)
BKM-227W NTSC/PAL Input Adaptor
(with serial number 2100001 or
higher)
BKM-229X Analog Component Input
Adaptor (with serial number 2200001
or higher)
BKM-243HS HD/D1-SDI Input Adaptor
(with serial number 2108355 or
higher)
BKM-244CC HD/SD-SDI Closed
Caption Adaptor
BKM-250TG 3G/HD/SD-SDI Input
Adaptor (with serial number 7300001
or higher)
Note
An input adaptor with a specified serial
number may be required for your
intended use.
For the serial numbers of the input
adaptors available for this unit, see "Input
Adaptors" (page 23).
Specifications (BVM-F250)
107