Table of Contents
Advertisement
Note: If the ambient temperature (the temperature in the area around the fireplace) is greater than the
set temperature, the HI/LOW display, fan, and Bulb will not operate.
1)
By pusing the
Celsius and vice versa.
2)
By pressing the TIME button, the LED display will switch from the "temperature" status to the
"time" status. The default time will display "--". This means that the TIME is not activated and,
therefore, the fireplace will remain on. You must press the HI/LOW/UP button or the
once again within (5) seconds to set the time. Each time you press the HI/LOW/UP button, the
time will increase by 0.5 Hr. If you press the
Hr. The maximum value for time is 8.0 Hr. By holding down the HI/LOW/UP button or
0
0
C/
F/DOWN for (2) seconds, the number rotation will cycle more quickly. If you do not press the
HI/LOW/UP button or
temperature status.
0
0
C/
F/Down button, you can switch the temperature format from Fahrenheit to
0
0
C/
F/DOWN within (5) seconds, the time status will switch back to the
0
0
Press the
C/
F/Down to
switch from Fahrenheit
to Celsius.
0
0
C/
F/DOWN button, the time will decrease by 0.5
Press TIME to switch
to time status, then
press HI/LOW/UP
button once within 5
seconds to scroll up
5 seconds later the
value switches to
ambient temperature
5
0
0
C/
F/DOWN
Advertisement
Table of Contents
