Advertisement
AMS 500
ABSOLUTE MARKING SYSTEM
Marking of endless strips (RTM)
This software has special features for marking of endless strips:
Strip partitioning
Copy a strip
Insert a strip
If you choose RTM strips, the above-mentioned functions for sectioning and marking of
strips are available on the menu "Edit". By clicking you can select the strip you wish to
mark.
Note: In order to mark an endless strips you have to prepare it first via menu Edit "Strip
partitioning".
Strip partitioning
You can open a window via Edit "Strip partitioning" which allows you to divide the strip
into various sections.
First put in the width of the strip you want to use (ex: terminal block ABB M4/6 is 6mm
wide) and then the amount of elements (terminal blocks) required in that width and confirm
by pressing the button "Append".
Thereafter you can select and add further sections with different widths.
If you wish to insert a section between other sections you have to mark-out the section before
which you want to insert. Then press the button "Insert" to start the process.
You can delete sections by marking-out the section and pressing the "Delete" button.
At the bottom part of the window you can check the strip-length already occupied and the
remaining strip-length.
After completion of sectioning press "OK" button and the strip will show up with the
corresponding divisions.
35
Advertisement
