All Reset - Citizen Watch Instruction Manual

Troubleshooting

◆ All Reset

When the watch does not work properly, you can reset all the settings. If the
power reserve is insufficient, charge the watch.
Check before performing All Reset.
After performing All Reset, you need to configure all the settings again.
Set the watch again by following the procedures outlined below:
1. Correct the reference position. See page 67.
2. Set the city. See page 22.
• To set Summer Time, see page 31.
3. Set the time.
To adjust the time by receiving the time signal, see page 59. To adjust the time
manually, see page 61.
74