Auto-Start-Stop System Deactivation; Fuel Cut-Off Inertia Switch Intervention/Fuel Cut-Off Not Available; Exterior Lighting Failure; Parking Sensor Failure - Ford KA Owner's Handbook Manual

095-104 Ford KA EN:091-100 Ford KA IT
Fuel cut-off inertia switch
intervention/fuel cut-off
not available
The warning light turns on when the
fuel cut-off inertia switch intervenes
or when the fuel cut-off system
is not available.
The display will show the dedicated
message.

Parking sensor failure

The warning light turns on and
the message is shown on the display
when a parking sensor failure
is detected. In this case contact
a Ford Dealership.
AUTO-START-STOP
SYSTEM
DEACTIVATION
(amber)
The warning light turns off when the
Auto-Start-Stop system is turned off
by pressing the button on the dashboard.
A corresponding message may be
displayed on some versions.
102
14-10-2010 11:34 Pagina 102

ESP SYSTEM FAILURE

I
(amber)

HILL HOLDER FAILURE

(amber)
ESP system failure
Turning the ignition key to MAR-ON
the warning light turns on, but it should
go off after a few seconds.
If the warning light does not go off or
stays on when travelling together with
the button LED ASR OFF, contact
a Ford Dealership.
The display shows the dedicated
message.
Note Warning light flashing when
driving indicates that the ESP system
is active.
Hill Holder failure
Turning the ignition key to MAR-ON
the warning light turns on, but it should
go off after a few seconds.
The warning light will turn on when the
Hill Holder system is faulty. In this case,
contact a Ford Dealership as soon as
possible.
The display will show the dedicated
message (where provided).
SIDE LIGHTS
3
AND DIPPED BEAM
HEADLIGHTS (green)

FOLLOW ME HOME

(green)
Side lights and dipped beam
headlights
The warning light comes on when side/
tail lights or low beams are turned on.
Follow me home
The warning light will turn on when this
device is active (see "Follow me home"
in section "Knowing your car").
The display shows the dedicated
message.
EXTERIOR LIGHTS
W
FAILURE (amber)
The warning light comes on
when an external light failure
is detected.