Do you have a question about the CMS2 and is the answer not in the manual?
Questions and answers
Gene
February 2, 2025
2017 cms2 hidden receiver volume controls not responding. Volume blasts on high and will not go down. Tried holding reset button down 5 seconds. Unhooked and checked cables coming from unit - all look like new. Sound a little garbled as well and seems to stick on max volume.
1 comments:
Mr. Anderson
February 10, 2025
The volume control issue in the 2017 Clarion CMS2 hidden receiver, where the volume is stuck on high and sounds garbled, could be caused by the AUX input sensitivity setting. If the sensitivity is too high, it may cause distortion and excessive volume. To adjust this:
1. Press the [ADJ] button. 2. Use the [(↑) / (↓)] buttons until “Aux In Mid” is displayed. 3. Press the [(←) / (→)] buttons to select “Mid,” “Low,” or “High.”
Selecting a lower sensitivity may help resolve the issue. If the problem persists, there may be a hardware malfunction in the volume control circuitry.
Page 1
Owner’s manual & Installation manual Mode d’emploi et manuel d’installation Manual de usuario y Manual de instalación MARINE DIGITAL MEDIA BLACK BOX WITH WATERTIGHT CONTROLLER BOÎTE NOIRE MARINE MULTIMÉDIA NUMÉRIQUE AVEC CONTRÔLEUR ÉTANCHE CAJA NEGRA DIGITAL MARINA CON CONTROLADOR HERMÉTICO...
We have made product registration simple with our easy to use website.The registration form is short and easy to complete. Once you’re registered, we can keep you informed of important product information. Register at www.clarion.com- it’s easy to keep your Clarion product up to date. Contents 1. FEATURES ........................3 2.
(2) this dev ice must accept any interference, including interference the interference by one or more of the following that may ca use undesired operation of the device. measures: CLARION CORPORATION OF AMERICA 6200 GATEWAY DRIVE, CYPRESS, CA 90630, USA Reorient or relocate the receiving antenna. FCC ID: AB7S-CMS2...
Microsoft by the Bluetooth SIG, Inc. and any use of such Corporation in the United States and / or other marks by Clarion Corporation of America is under countries. license. Other trademarks and trade names are those of their respective owners.
Rave->Movie->Techno->User correctly. Loud On/Off 3. When an Error Code or Message is displayed. Press the [ ] buttons to select Loundness between ON and OFF. Subwoofer On/Off Press the [ ] buttons to select Subwoofer between ON and OFF. CMS2...
AM/FM/Weather Band mode – Confirm (in Preset and Manual store) USB mode – Confirm (in Menu/Search mode) iPod/iPhone mode – Confirm (in Menu/Search mode) SiriusXM mode Confirm ch (in Search mode) – AUX In mode No function – BT Audio mode Confirm (in Menu/Search mode) – CMS2...
Adjusting the volume 1. Press VOL+ button to increase the volume. 2. Press VOL- button to decrease the volume. CAUTION While boating, please be aware of the volume levels in residential, family areas and local volume level ordinances. CMS2...
1. Select the desired station with seek tuning or manual erased. tuning. 2. Press and hold the [ ] button 3. Press the [ ] button to select a preset number. 4. Press the [ ] button to store current station into preset memory. CMS2...
SCAN. Scan time is approximately 10 seconds. Recalling a Preset Station A total of 7 preset positions (WB1~WB7) exists to store individual weather band stations in memory. Press [ ] button to select the desired preset weather band station to recall the stored frequency. CMS2...
5. Press the [ ] button to confirm channel number 3. Press the [ ] button to confirm tune to that channel. selection. Note: If no operation, after 3 seconds will return to the select Preset automatically. CMS2...
Page 11
Channel name =>Artist Name => Song Title=> channels. Content Info=> Category Name Note: Press [OP] Option button to exit . Note: If there is no text information,nothing will be displayed. CMS2...
5. Press the [ ] button to enter the file list search mode. And then the track list appears in the display. 6. Press the [ ] button to select a track. 7. Press the [ ] button to play. CMS2...
Play / Pause Press the [ ] button to pause the track/song that is currently playing. Press the [ ] button to resume playing the track/song that has been paused. [DISP] Display Button Press [DISP] button to check iPod information. CMS2...
4. When “Simple Control” is displayed, press the [ function. Please consult Clarion Customer Service button to turn the Simple Control ON or OFF. or Clarion website to confirm which models are ON: iPod/iPhone controls are made through your supported connected iPod/iPhone device.
Repeat feature OFF. your Bluetooth device, select “Clarion”. 1. Press the [OP] Options button. 3. “Successful” will appear on the CMS2 display. 2. Press the [ ] button until “Repeat All” is displayed. 4. The unit will automatically enter the BT Audio source 3.
The selected channel has been locked by a mature channel has been selected. A prompt to enter the unlock code will appear. SUBSCRIPTN An update to your SiriusXM subscription has been received by the SiriusXM tuner. Press UPDATED any button to continue. CMS2...
8-Pin DIN Cable 8-Pin DIN Cable M Tapping Mounting Screw Bracket Flush Mount 8-Pin DIN Cable Method 3 Screw Hole This method requires the Flush Mount Screw Hole purchase of the optional BKU001 Gimbal mount accessory Method 1 Method 2 CMS2...
Page 19
ON and power on the unit to check if it is operating correctly. If abnormalities occur, disconnect the battery negative terminal, recheck all wiring and try again. Please refer to the troubleshooting section for assistance. BLACK BOX MOUNTING M4 TAPPING SCREW 4 PCS SCREW HOLE RUBBER STOPPER 4 PCS CMS2...
GREY WHITE GREY/BLACK SPEAKER FRONT RIGHT (-) BLUE/WHITE AMPLIFIER REMOTE TURN ON (+) 3048mm (10 feet) PURPLE SPEAKER REAR RIGHT (+) PURPLE/BLACK SPEAKER REAR RIGHT (-) BLACK GROUND (-) Female Male Big 8Din Cable Female DISPLAY CONTROLLER DISPLAY CONTROLLER CMS2...
Need help?
Do you have a question about the CMS2 and is the answer not in the manual?
Questions and answers
2017 cms2 hidden receiver volume controls not responding. Volume blasts on high and will not go down. Tried holding reset button down 5 seconds. Unhooked and checked cables coming from unit - all look like new. Sound a little garbled as well and seems to stick on max volume.
The volume control issue in the 2017 Clarion CMS2 hidden receiver, where the volume is stuck on high and sounds garbled, could be caused by the AUX input sensitivity setting. If the sensitivity is too high, it may cause distortion and excessive volume. To adjust this:
1. Press the [ADJ] button.
2. Use the [(↑) / (↓)] buttons until “Aux In Mid” is displayed.
3. Press the [(←) / (→)] buttons to select “Mid,” “Low,” or “High.”
Selecting a lower sensitivity may help resolve the issue. If the problem persists, there may be a hardware malfunction in the volume control circuitry.
This answer is automatically generated