Overview Of The Software Installation; Hardware Detection; Important-Sleep Mode Is Not Supported In Windows 7 And Vista - Matrox RT.X2 Installation Manual

22

Overview of the software installation

Once you've installed your Matrox RT.X2 hardware and properly connected your
devices, you can proceed with the software installation. This includes installing
Adobe Premiere Pro and Matrox Mx.tools. Matrox Mx.tools installs the drivers
for your Matrox RT.X2 hardware and the Matrox realtime plug-in for Adobe
Premiere Pro.

Hardware detection

Turn on your computer. Once Windows restarts, the "Found New Hardware
Wizard" detects your Matrox RT.X2 hardware. Because the Matrox Mx.tools
Setup program will automatically detect your devices and install the appropriate
drivers, simply press
Wizard."
¡ Important The "Found New Hardware Wizard" will appear for each of your
RT.X2 hardware components. Make sure that you close the "Found New
Hardware Wizard" each time it appears. To ensure a smooth Matrox RT.X2
software installation, it is essential that you do not let the "Found New Hardware
Wizard" try to install any drivers.
The "Found New Hardware Wizard" will only appear the first time you start your
computer after installing your RT.X2 hardware.
Important—sleep mode is not supported in
Windows 7 and Vista
On a Windows 7 or Vista system with Matrox RT.X2, sleep and hibernate modes
will cause your system to become unstable. Therefore, you must disable the
Windows sleep and hibernate functions as follows:
Choose Start > Control Panel > System and Security (Windows 7) or
1
System and Maintenance
Under your selected power plan, click Change plan settings , then click
2
Change advanced power settings
Under Sleep , set Sleep after and Hibernate after to Never .
3
Under Power buttons and lid , set all the options to either Shut down or
4
Do nothing
Click OK .
5
Chapter 4, Installing Your Matrox RT.X2 Software
or click Cancel to close the "Found New Hardware
ESC
(Vista) > Power Options .
.
.