Hitachi C-10FCB Technical Data And Service Manualice Manual page 5

(4) Compound cutting through use of miter and bevel cutting functions
Maker
Model
Max. cutting
dimension
Left bevel 45˚
Right/Left miter 45˚
Height x Width
(H x W)
By turning the table to the right or left and inclining the saw
blade section (head) to the left, the Model C 10FCB is
capable of compound cutting (bevel and miter, see Fig. 4) of
workpieces with the maximum dimension shown in Table 4.
(5) Equipped with debris guard to restrict dispersion of chips for enhanced safety in operation
A debris guard has been adopted to prevent wood chips from adhering to the saw blade at the end of the
cutting operation. The debris guard tilts together with the saw blade during bevel cutting, thereby enhancing
safe operation.
(6) Lightweight design
14 kg in weight, for easy transport in a workshop
Table 4
(Unit: mm)
HITACHI
C 10FCB
41 x 102 (1-5/8" x 4")
* When the saw blade section (head) is inclined 45˚ to the
left, the maximum possible angle setting of the table is
restricted to 45˚ to either the left or right.
--- 3 ---
Width (W)
Height (H)
Fig. 4