Installing Software Using The Tftp Server Method; Download Sps-2000 Software Files - Sam4s SPS-2000 Program Reference Manual

Installing Software Using the TFTP Server Method

This software installation method allows you to update any of the SPS-2000 program areas selectively using a
network connection. If you are updating an ECR with BootRom version 1.10 or later, you can forgo use of
the TFTP server method and use an SD card or USB memory device to update both applidaton and operating
system files.
A. Download SPS-2000 Software Files
Go to the SPS-2000 dealer support page of
complete software version.
Note: The process used to download and unzip the software files will differ depending upon the operating
system and file compression utility used on your PC. One example is shown below. Your procedures should
be similar.
3. Choose a folder where you wish the
extracted files to be located. Make a note
of the folder location.
SPS-2000 operating system and application files include:
zImage (Linux O/S file)
app.yaffs (Application file)
Bootrom.bin (Boot ROM)
Micom.bin (MICOM file)
NandBoot.bin (Booting program in case normal booting fails)
Ramdisk.gz (Linux O/S zip file)
xlib.yaffs (Contains font, graphic library, etc.)
22  Software Installation & SD Memory Utilities
www.crs-usa.com
1. From the SPS-2000 Support page of www.crs-usa.com,
locate the most current complete version. Right-click on the
file, select Open, and then click the Open button on the file
dialog box.
and download the zip file for the most current
SPS-2000 Program Manual v1.30
2. After the file
downloads, open
WinZip and
extract the files to
a designated folder
on your PC.