Equinox Quadzilla Safety WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain, moisture and liquids. SAFETY INSTRUCTIONS Every person involved with the installation, operation & maintenance of this...
Equinox Quadzilla Safety IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • Never let the power-cable come into contact with other cables. Handle the power-cable and all mains voltage connections with particular caution! •...
Page 4
Equinox Quadzilla Technical specifications You should find inside the Equinox carton the following items: 1, Equinox Quadzilla 2, Power cable 3, Instruction manual Technical Specifications: DMX channels: 6 Voltage: AC 240V - 50Hz 256 Ultra Bright LEDs (R: 96, G: 64, B:96)
Page 5
Equinox Quadzilla Overview Master/Slave connection 1) Connect the 3-pin (male) connector of the DMX cable to the output 3-pin (female) connector on the master unit 2) Now connect the opposite end of the DMX cable to the input socket on the slave unit/s.
Page 6
DATA Cable (DMX cable) requirements (for DMX operation): • The Equinox Quadzilla can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output (figure 1).
Page 7
Equinox Quadzilla DMX Set up Notice: • Be sure to follow figures 2 & 3 when making your own cables. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing.
Need help?
Do you have a question about the QUADZILLA and is the answer not in the manual?
Questions and answers