Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Vermona VSR-3
- Page 1 VSR-3...
-
Page 2: Important Safety Instructions
The VSR-3 vintage spring reverb creates this classic sound - not by simulation but by using real springs combined with modern low-noise circuitry. We are proud to welcome you as VERMONA VSR-3 user and hope that you will enjoy to use it during music production and performances. Important Safety Instructions Read these instructions. - Page 3 Owner's Manual VERMONA VSR-3 - vintage spring reverb caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.Servicing is required...
-
Page 4: Getting Started
Switch off the VSR-3 before connecting. Connect the provided power cord to the MAINS IN (10) jack. Connect on of the input jacks (1) or (7) of the VSR-3 to the audio output of your signal source, i.e. an instrument (guitar, synthesizer), a CD player, the output of your DAW, etc. -
Page 5: Front Panel
Owner's Manual VERMONA VSR-3 - vintage spring reverb Control Surface Features Front Panel INPUT This high-Z jack input (1MΩ) on the front works well with electric guitars or basses. The inputs on the rear will be muted when this jack is used. -
Page 6: Rear Panel
VSR-3 operational. The VSR-3 has a switching power supply and can be used with AC voltages from 90V to 240V (50/60Hz). (11) POWER This switch turns the VSR-3 on/off. The LED above the EFFECT STOP switch on the front illuminates once the unit is operational. - 6 -... -
Page 7: Specifications
Owner's Manual VERMONA VSR-3 - vintage spring reverb Specifications Inputs Front Jack max. input level -40dBu Impedance 1MΩ Rear Jack (1) max. input level 0dBu Impedance 100kΩ Rear Jack (2) max. input level -20dBu Impedance 10kΩ Outputs Level (1) 0dBu... -
Page 8: Declaration Of Conformity
Owner's Manual VERMONA VSR-3 - vintage spring reverb Declaration of Conformity We declare under our sole responsibility that this product is in conformity with the following standards or standardization documents in attention of operation conditions and installation arrangements acc. to operating...
Need help?
Do you have a question about the VSR-3 and is the answer not in the manual?
Questions and answers