Related Manuals for Addonics Technologies AE5IDECSU2
Summary of Contents for Addonics Technologies AE5IDECSU2
- Page 1 Addonics T E C H N O L O G I E S External USB2.0 Enclosure For Following Models: AE5IDECSU2 AE5SACSU2 User Guide...
-
Page 2: Limited Warranty
Addonics reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. Addonics Technologies... - Page 3 Contents.................. 3 Chapter 1 Hardware Installation ..........4-6 Connecting a Drive to the Computer ......6 Partition Drive in Windows 98, 98SE...... 7-9 Partition Drive in Windows 2000 & XP ....9-11 Technical Support & Contact Information ........ 12 Addonics Technologies...
-
Page 4: Hardware Installation
Step 2 For Model: AE5IDECSU2 (For IDE hard drive installation) Note: You need to configure your IDE hard drive as MASTER before using it with the enclosure. If you are not sure how to configure your hard drive as a MASTER device, contact your hard drive manufacturer. - Page 5 Connect the SATA hard drive to the SATA interface of the SATA to IDE converter. This connection would provide both power data connectivity to the hard drive. It is not necessary to connect the 4-pin Molex power connector. SATA device attached converter Addonics Technologies...
- Page 6 3. Connect the USB connector to the enclosure and the other end to the computer. Turn on the switch. 4. Follow the software installation for driver installation. Note: Windows 2000 & XP use built-in drivers. No need to install third-party drivers. Addonics Technologies...
- Page 7 Then hit Enter. Create one partition 1. If you pressed Y, the computer will create the partition and then transfer you back to the beginning screen. From here, select 4 to inspect to new hard drive's partition. Addonics Technologies...
- Page 8 11. Press Enter to "Create Logical DOS Drive(s) in the Extended DOS Partition." 12. After hitting Enter, you'll see a new letter assigned to the new partition you just created. 13. Press Esc to exit this screen and return to main menu. Addonics Technologies...
- Page 9 2. Right click on the drive letter and left click Format. A new window will show up. Select the Full Format option then click Start to continue. 3. When the Format is complete, you can now access the drive letter assigned for the hard drive. Addonics Technologies...
- Page 10 You can change the disk allocation unit size, and then specify whether to perform a quick format, or enable file and folder compression on NTFS volumes. Click Next. 7. Confirm that the options that selected are correct, and then click Finish. Addonics Technologies...
- Page 11 NTFS volumes. 4. Click OK. 5. Click OK when you are prompted to format the volume. The format process starts. Addonics Technologies...
-
Page 12: Technical Support
OPERATING SYSTEM – What version of DOS/Windows WHAT’S THE TROUBLE? – Give enough information about your problem so that we can recreate and diagnose it. FREE Software Drivers for all Addonics Technologies Products are available 24 hours per day at the World Wide Web Site: www.addonics.com.
Need help?
Do you have a question about the AE5IDECSU2 and is the answer not in the manual?
Questions and answers