PhaseOne 645DF User Manual
  1. Manuals
  2. Brands
  3. PhaseOne Manuals
  4. Digital Camera
  5. 645DF
  6. User manual

PhaseOne 645DF User Manual

Camera
Hide thumbs Also See for 645DF:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Quick Manual
User Guide Phase One 645DF Camera

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 645DF and is the answer not in the manual?

Questions and answers

Related Manuals for PhaseOne 645DF

Summary of Contents for PhaseOne 645DF

  • Page 1 User Guide Phase One 645DF Camera...
  • Page 2 Specifications and appearences are subject to change without notice. Trademarks & acknowledgements Capture One and Phase One are either registered trademarks or trademarks of Phase One A/S in the European Union and/or other countries. All other trademarks are the property of their respective owners.

  • Page 3: Table Of Contents

    1.3 Recommended hardware 6.1 CF card usage 1.4 Installation and Activation of software 6.2 Mounting and dismounting card on computers 1.5 Deactivation of Capture One 5 6.3 Navigating the Back menu 1.6 Screen calibration 6.4 Playmode 2.0 The Body - the system 6.5 Playmode – zoom functions 2.1 Unpacking the 645DF system 6.6 Menu Mode 2.2 Batteries for camera 7.0 Custom function 2.3 Batteries for the back 7.2 Types of custom functions 2.4 Attach and remove lens Custom Functions overview 2.5 Adjusting the Strap 7.3 Custom Dial Modes C1, C2 or C3 2.6 Attaching the back 8.0 Lenses and Multi Mount...

  • Page 4: Introduction

    Phase One that fits your needs. For more than 20 years Phase One has been on the cutting edge of research and development to bring you a camera system that provides the absolute best solution to image quality and workflow.

  • Page 5: Warranty

    – Do not try to repair the camera yourself, unauthorized attempt to repair camera will terminate the warranty. Recommended hardware Capture One 5 may run on older computers, but Phase One recommends following the minimum requirement to ensure the best result from Capture One 5.

  • Page 6: Installation And Activation Of Software

    You can only install Capture One 5 when your computer is connected to the internet unless you choose to install Capture One DB (Digital Back) - only supporting Phase One backs. Install on Mac OS X 10.5.6 or later: Capture One software includes an easy-to-use installer that will install all the software necessary to run the application on Mac OS X 10.5.6...
  • Page 7 Type in the personal details that you want, and register your types of hardware along with your software activation. Once you have entered the information press the “Activate License” button and your activation will be validated by Phase One’s activation server. Your software is now activated and ready for use! Troubleshooting...
  • Page 8 1.5 Deactivation of Capture One 5 To deactivate Capture One 5 from a computer you need to be connected to the internet. Open the license dialogue via the menu Capture One>License. Press the Deactivate button. Once you deactivate Capture One, the application will return to trial mode.

  • Page 9: Screen Calibration

    Screen calibration Your monitor is key-element in your daily workflow. Therefore having a properly calibrated monitor is a very importantinadvertent factor when viewing your images. Just as you would ensure you were viewing your prints and negatives in color neutral light, you would also want to ensure your digital viewing conditions are as accurate as possible.

  • Page 10: The Body - The System

    Added, the contents of each are listed below. Unpacking the 645DF system The Phase One 645DF system is delivered in a case created for the travelling photographer, the waterproof and impact resistant case has the standard measurements of carry-on baggage in airplanes.
  • Page 11 Value Added: The case is flexible inside, completely customizeable so you can decide the actual content and interior of the case. But as delivered the case will hold: • P+ digital back • 645 DF camera body • Schneider Kreutznach 80mm LS f 2.8 Lens •...

  • Page 12: Batteries For Camera

    Batteries for camera Set the shutter release mode selector lever to “L” (to turn the power off). Use six “AA” alkaline or Lithium batteries. NiCd or NiMH batteries should only be used in the camerabody if CF04 is set on rechargeable. Read more on C-04 Select battery [batt] on page 90 1.
  • Page 13 The camera’s power is turned on when the shutter release mode selector is set to “S,” “C” or “M.UP .” In order to prevent the camera’s batteries from discharging, sleep mode is automatically entered if no operations are performed for a specific period of time while the power is ON (with exposure metering status maintained).

  • Page 14: Batteries For The Back

    The Phase One P+ back comes with two 2500mAh batteries. •Do not allow charger to get wet or get exposed to moisture If you need to purchase extra batteries Phase One recommend Canon •Keep the Charger out of reach of children •Once charging is completed, unplug the transformer from power source...

  • Page 15: Attach And Remove Lens

    Attach and remove lens 1. Remove the front body cap, just like you would remove a lens, by pushing the lens release button [A] backward and then turn the front body cap or the lens itself counter clockwise and lift out. 2.

  • Page 16: Adjusting The Strap

    Attach the leaf shutter lens Leaf shutter lenses are equipped with an internal shutter, leaf shutter lenses are capable of high shutter speeds 1/800 sec. or 1/1600 on P65+ and P40+ with flash synchronization which is particularly useful when you are doing daytime fill-in flash photography. When the leaf shutter lens is attached and the leafshutter is used, the letters “LS”...

  • Page 17: Attaching The Back

    The P+ back is fully integrated with the camera body and functions as a part of the whole camera system. When no digital back attached to the Phase One 645DF camera body the mirror is up and the shutter is open. This is the correct position when no back is attached.

  • Page 18: The Parts Of The Camera System

    The parts of the camera system Hot shoe Exposure mode dial Self timer button Interval button Rubber eye piece Eyepiece shutter lever Main LCD backlight button Main LCD Multiple exposure button Mirror* Exposure metering mode selector *Do not touch the mirror Focus point selector button Rear dial Electronic contacts...

  • Page 19: The Displays

    The displays The display on the camera body will provide you with a lot of valuable information. This includes many features and settings including, but not limited to shutter speed, aperture value, exposure program, exposure compensations and metering modes. See the figure for full explanation. mode set mode set During actual use, only the relevant icons and indicators are displayed.

  • Page 20: Display Abbreviations

    Display abbreviations Display examples in the custom function mode Liquid Crystal Display Due to the limitations of the space and letters, words and letters on the LCD are abbreviated. Display examples of the main LCD...

  • Page 21: The Buttons On The Back

    The buttons on the back The back is equipped with four buttons, these buttons will take you through all functions of the back, and the buttons will change function to match the menu shown on the display. Read more on the menus in the chapter regarding this.

  • Page 22: Setting Date And Time

    2.11 Setting date and time Date and time is set and controlled through the digital back. Default date and time is GMT+1. If the digital back has been without power for a longer period of time, it will automatically ask you to setup time and date when it is powered up. In the “Time &...

  • Page 23: Setting Diopter

    2.12 Setting diopter Look through the viewfinder and make sure that the focus frame Diopter correction lens Range of Adjustment (Rectangle with Circle) is in sharp focus. If it is not, turn the diopter DE401 -2,5 to +2,5 (standard) adjustment dial in the “–” direction if you are nearsighted, in the “+” -5,0 to -2,0 DE402 (fnearsighted users)

  • Page 24: Eyepiece Shutter

    Replacing the Diopter Correction Lens 1. Remove the rubber eye piece by sliding upwards Notice: If there is dirt or dust on the lens surface, remove it with a blower or sweep it off gently with a lens brush If there are fingerprints or dirt on the lens surface, wipe them off with a piece of clean, soft gauze Using solvents could discolor the...

  • Page 26: Basic Functions

    Basic functions Setting ISO ISO functionality is controlled by the digital back. The default ISO setting is either ISO 50 or 100 depending on which back you are using. Keep in mind that the higher ISO you are using, the higher degree of noise you will see in your image file.

  • Page 27: Easy Photography

    Easy Photography 1. Set the shutter release mode selector lever to “S” (single-frame advance mode). There are two shutter release modes: “S” (singleframe advance mode) and “C” (continuous advance mode). When set to “L” the power is turned off. 2. Set the focus mode selector lever to “S” (single focus mode). There are three focus modes: “S”...
  • Page 28 There are four exposure modes: “P” (Program Auto Exposure), “Av” (Aperture priority AE) “Tv” (Shutter priority AE) “M” (Manual mode). P: Program AE - The aperture and shutter speed are determined automatically according to the shooting conditions. This mode is best suited for general photography, since it allows you to concentrate on the shooting.

  • Page 29: Measuring Light - Exposure Metering

    Measuring light – Exposure Metering 1. Exposure metering mode mark is displayed when the exposure metering mode button [A] is pressed shortly. Three different exposure metering modes are displayed sequentially when either the front or rear dial is turned, select an appropriate exposure mode. 2.

  • Page 30: Focus Modes

    Focus modes If autofocus AF is desired, chose AF on the focusing selector ring on the lens, then chose between S(single) and C(continuously) Auto focusing. The Focus selection ring on the lens will help you to rapidly switch between AF and M, without having to change your grip of the camera. The shutter release button has a two-step action.
  • Page 31 To use the auto focus function, both the camera body and the lens have to be set in the auto focus mode. When either the camera body or the lens is set in the manual focus mode, auto focus does not function. See the instruction manual for each lens for the way to switch focus mode on the lens.
  • Page 32 Turn the focus mode selector lever to “M” (manual focus mode). 2. Manual Focus operation for Telephoto and Zoom lenses. All newer Phase One, Mamiya and Schneider Kreutznach lenses can be switched from Auto Focus to Manual Focus by using the AF ring or slider fitted on the lens.
  • Page 33 - When a lens with the focus mode selector is attached and the focus mode selector lever of the camera body is set at “S” or “C”, you can change focus modes between automatic and manual with the selector of the lens. - To use the auto focus function, both the camera body and the lens have to be set in the auto focus mode.
  • Page 34 Manual focusing using the focus mark (Focus confirmation method) With this camera, the focus mark lights in the viewfinder’s LCD when the picture is in focus. With the shutter release button half-pressed, turn the lens focusing ring to focus on the subject. When the subject is in focus, the focus mark lights in the viewfinder’s LCD.

  • Page 35: 3.5 Using Focus Lock And Infrared Focusing

    3.5 Using focus lock and infrared focusing Using the Focus Lock Function If the object that you want to focus on is not in the focus frame, the camera focuses on the background at the center. In such cases use the focus lock function to lock the focus before releasing the shutter.
  • Page 36 AF Assist Infrared Light When the subject is dark or very low-key and the camera can fail to auto-focus, a red lamp may light on the front of the camera when the shutter release button is half-pressed. This light assists the camera’s auto focus function and he AF assist infrared light is emitted only when the focus mode is set to “S”...

  • Page 37: 3.6 Shutter Release Modes

    3.6 Shutter release modes Single-Frame Mode One photo is taken each time the shutter release button is pressed. Set the shutter release mode selector to “S” Continuous Mode Photos are taken as long as the shutter release button is pressed. Set the shutter release mode selector lever to “C”.
  • Page 38 “PL” (low speed). This function [StEP] allows you to make these changes quickly. Phase One 645 program shift chart (ISO100/AF80mm F2.8 D) 10 11 12 13 14 15 16 17 18 19 20 21 22...
  • Page 39 Aperture Priority AE (Av) NOTICE: Set the desired aperture, and the camera selects the optimum shutter The shutter speed value will blink when speed accordingly. Use the Av mode to maintain specific control over the subject is too dark or too bright for a depth of field, i.e.
  • Page 40 Manual Mode (M) NOTICE: This mode is used to set both the aperture and shutter speed for total When the exposure is compensated exposure control. Varying shutter speeds can be selected, including in the Manual mode, the difference “bulb”, “tIME” and manually from 60 mins to 1/4000 sec. Aperture between the metered value and the compensated value will be displayed values can be set from maximum to minimum aperture.
  • Page 41 One-push shift function When difference between the set value and metered value is displayed on the viewfinder LCD in the Manual “M” mode, press the AEL button for approx. 1 second and the camera will automatically adjust the shutter speed to achieve the correct exposure based on the set aperture value. Notice: While the difference[B] between the set value[A] and the metered The aperture level can be selected for...

  • Page 42: 3.8 Exposure On Leaf Shutter Vs. Focal Plane

    3.8 Exposure on Leaf shutter vs. Focal plane Exposure Lens Mode Shutter speed X-Sync Mode 1/4000-1/800 1/800-1S 1S - 30S+ 1/4000 - 1/800 1/800 - 1S 1s - 30S+ Program Leaf Shutter — — — — Focal Shutter — 1/90 - 1S —...

  • Page 43: Flash Photography

    In addition to its standard flash sync system, the Phase One 645DF the camera’s synchro terminal. features TTL (through the lens), off the film (OTF) and electronic flash When using flashes with a flash exposure metering.
  • Page 44 Phase One 645DF features TTL (Through The Lens), OTF (Off The Film) Metz 3952 functions and electronic flash exposure metering. A flash sensor located inside the camera body reads the flash light reflected off the surface of the Charging completed indicator in...
  • Page 45 Example: (1) When the size of the subject you want to light with the flash is Exposure mode Shutter speed Aperture relatively small within the picture Program AE Automatically set by Automatically set by camera to 1/60 sec. camera when the metered (2) When the background behind the subject is extremely bright or when Aperture priority AE Any aperture...

  • Page 46: Flash Compensation Settings

    Flash compensation settings   By combined use of a Metz flash and the SCA3952 adapter, the camera adjusts for flash. It can be adjusted within ±3EV in increments of 1/3 steps. 1. Turn on the power Install the SCA3952 adapter on the Metz flash, and put it on the camera then lock the flash in place using the locking knob on the flash shoe.

  • Page 47: Flash Photography With Electronic Flash Models Other Than Metz

    Flash Photography with electronic flash models other than Metz 1. To use a grip type flashgun or a strobe with other electric contacts than X contact, connect the sync. cord to the camera’s sync. terminal. (See note below about flashes designed exclusively for other maker’s cameras.) 2.

  • Page 49: Advanced Functions

    Advanced functions NOTICE: After taking pictures using the exposure compensation feature, Exposure Compensation be sure to return the exposure compensation dial to the “0” position. In situations providing extreme high contrast, the resulting photograph may be under- or overexposed. When this occurs, use the exposure The exposure compensation dial is compensation function.

  • Page 50: Ae Lock

    AE Lock Shooting with the AE lock function is useful in cases where the subject to be brought into focus differs from the subject whose exposure is to be measured or when measuring the exposure of a particular part to be brought into focus using spot exposure metering mode while that part is on the shooting screen.
  • Page 51 Metered-value difference indicator Keep pressing the AEL button [A] and the difference between the metered exposure value and the exposure of the new composition will be displayed on the viewfinder LCD. This function can be used to see if an object of very different brightness levels can be properly photographed.

  • Page 52: Auto Bracketing

    Auto Bracketing NOTICE: When it is difficult to determine your exposure compensation value When you want to cancel the auto- you can use the auto exposure bracketing feature. This allows you bracketing mode, turn the rear dial to change “On” to “OF” to automatically capture different exposure variations in succession.
  • Page 53 Single-Frame Mode (S) Press the shutter release button for each shot. AE settings under auto-bracketing mode The camera meters adequate exposure value for each shot and Exposure Mode Setting performs auto-bracketing. The camera stays in the auto-bracketing Program AE Shutter speed varies mode until you cancel the auto-bracketing mode manually.

  • Page 54: Taking Photos With The Mirror Up

    Taking photos with the mirror up NOTICE: This function prevents mirror-caused vibrations which may blur the image Auto bracketing exposures can be made when the auto bracketing in close-up photography, when shutter speed is slow, when a telephoto mode is set before taking photos with lens is used, or when photographing a poster or e.g.
  • Page 55 Mirror up delay To change from the self timer setting to the mirror up setting, press the shutter button so the mirror goes into the upright position and once the set time has expired the shutter will release, and the mirror will return to the lower position.

  • Page 56: Bulb Mode & Long Exposure

    Bulb Mode & Long exposure NOTICE: To make an exposure longer than 30 seconds, adjust the shutter speed As the camera is electronically to “B” (bulb). In order to prevent camera shake, use the RE401 or RS402 controlled even during exposures, it is recommended to replace batteries electromagnetic shutter release and tripod.

  • Page 57: Front/Rear Dial Lock Mechanisms

    Front/rear dial lock mechanisms NOTICE: The setting will be stored after one When the Electronic Dial Lock is “On,” all currently set values in “Av” second. (Aperture Priority AE), “Tv” (Shutter Priority AE) and “M” (Manual mode) cannot be adjusted with the front or rear dials. This prevents accidental Dial lock can not be set when the exposure mode is “P”...

  • Page 58: Self Timer Mode

    Self timer mode With this function, under the default setting the shutter is released 10 seconds after the shutter release button is pressed. The self timer lamp flashes slowly for the first 7 seconds, and then flashes quickly for the Notice: last 3 seconds before the shutter is released.

  • Page 59: 4.9 Interval Photography

    4.9 Interval photography By repeated turning, the interval time can be set automatically. It can be set to suit scenes such as cloud movement or a flower going in bloom. Notice: Repeat turning (according to the number of times) will lead to a 1.

  • Page 60: Depth Of Field

    4.10 Depth of field Depth of field (D.O.F.) is defined as the zone of sharpness before and behind the plane of focus. It depends on distance to subject, focal length of lens, aperture setting and distance the lens is focused at. In addition to visual observation via the depth of field preview button, the D.O.F.

  • Page 61: Infrared Photography

    DO NOT TRY THIS AT HOME! a back dedicated to infrared photography. – All corrections in this area must be done by Phase One to ensure the precision. If you remove the protectionglass or make other physical adjustments on the back the warranty will immediately be void.

  • Page 62: Tethered Shooting

    Tethered shooting Phase One is on the cutting edge of quality and technology, however Phase One still maintains it’s commitment to being intuitive. It is as easy as plug and play and it is created to match all shooting environments.

  • Page 63: Tethered Operations

    P+ back. If using a laptop with the (non P+) P 20 and P 25 it is necessary to use the Phase One “No Firewire Power Solution” Part.# 70508 to force battery power.

  • Page 64: The Back

    The Back The back is a highly developed electronic device. The Phase One backs are created to provide a natural and easy workflow, without creating unnecessary complicated functions or menubrowsing. You can see the menu flow chart here and read more on the menuoptions in this chapter.

  • Page 66: Cf Card Usage

    When working with CF-cards, card readers and digital cameras it is very important to follow a few rules to avoid loss of data. Phase One recommends that you test-drive all new Compact Flash cards (including the one enclosed). By doing an initial test to verify that the capture...
  • Page 67 CF card usage – 3S the Secure Storage System When a card is inserted into the P–back, a complete disk check for a valid file structure is performed. For smaller CF cards the time to load is negligible, however you may notice some lag with larger cards.
  • Page 68 When inserting the card into the card reader on a Mac or PC, the card will be mounted as a removable drive on the computer. For information on how to import the files to Phase One Capture One, please consult the Capture One online user guide available under...

  • Page 69: Mounting And Dismounting Card On Computers

    Mounting and dismounting card on computers On Windows™ computers the proper procedure to eject your CF card is to right click on the icon in “My Computer” and select “Eject”. Not following this procedure can confuse the system and possibly unintentionally damage or erase a CF card.
  • Page 70 Phase One recommends formatting in the digital back. Selecting “Format disk” will erase the CF-card in the P+ back. The CF- card will be formatted as FAT-32. Formatting on a Mac OS X computer On Mac OS X the formatting cannot be done directly in the finder but is easily done inside the Disk Utility located in the Applications >...

  • Page 71: Navigating The Back Menu

    The main screen also shows the current ISO setting, white balance setting and IIQ Raw file format selected. Menu buttons The Phase One P+ back has four menu buttons to control the menu Exit/Play system on the display. •...
  • Page 72 From the home position, pressing the “Play” button will bring up the image browser, where you can go up and down with the right hand buttons, to browse through images. Pressing the “Menu”” button will bring you to the menu system where you can scroll up and down in the menu system with the right hand buttons to select the menu options to set.
  • Page 73 Battery and Power Indicator The screen dumps illustrate the battery and power mode indicators. This is the initial view that meets the user when switching on the P+ back (not connected to a computer). When a FireWire cable is inserted and the P+ Back draws the power from FireWire this is shown with an icon in the bottom of the main menu.

  • Page 74: Playmode

    Playmode “Play mode” can be used to review, zoom and delete images. From the “Main screen”, pressing the top left button the P+ back is set to Play mode. In Play mode the top of the screen will show a menu bar. In the right side of the menu bar the current image number and the number of images captured on the media is displayed.

  • Page 75: Playmode - Zoom Functions

    View modes Play mode has four view modes, or review modes; Normal image display, Exposure warning overlay, Histogram overlay or File Info overlay. After entering the Play mode, press the “Enter” button to shift to the view mode you want. Exposure warning overlay will warn about burned out areas in the image by filling in the blown highlights with a flashing color.
  • Page 76 An icon just beside the Play button (top left hand button) will show the direction of scroll as either vertical or horizontal. Pressing the “Play” button once will change this from horizontal to vertical scroll when using the up and down buttons. (Left side) To exit the zoom function use the enter key to navigate to the eyeglass icon in the pan view and press the Play button to step to the next icon in the menu bar.

  • Page 77: Menu Mode

    Menu Mode Pressing the lower left button sets the P+ back in “Menu mode”. Entering Menu mode by pressing the lower left button allows you to set up all the preferences of the P+ back. Menus are navigated by following the Enter, Exit, Up and Down arrows and pressing the corresponding buttons on the P+ back.
  • Page 78 Short latency has a shorter response time, but is power consuming, so when battery time is an issue you should select “Long latency” at the cost of response time from the camera. Always set the P+ back to “long latency” when the back is used in “two shoot mode”...
  • Page 79 In the ISO Menu choose from ISO 50 to ISO 1600 depending on the conditions you want (number of ISO options may vary depending on which model P+ back is used). In general the higher ISO, the more noise in the image. This means that for optimal image quality, it is a better strategy to have more light in the scene or adjust the f stop on the camera, than just turning to a higher ISO.
  • Page 80 When scrolling to the bottom of the WB options four options are available: “Custom1”, “Custom2”, “Custom3” and “CreateWB…” To make a new custom white balance select CreateWB… and choose which one from the following: “Custom1”, “Custom2” or “Custom3” When one of the options is selected the “Make Custom WB” will be blinking. Now you are ready to capture the image that should be used for white balancing.
  • Page 81 The P+ back will beep to confirm that the custom white balance is uploaded, saved and ready to be disconnected. This technique is useful because you can bring up to three predefined custom white balances taken in the studio to your location shoot. Please be aware that when shooting tethered to the computer, the white balance must still be set in the Capture One application.
  • Page 82 Delete options There are three delete options: “Confirm On”, “Confirm Off” and “Disable”. In Delete options you can setup whether you want an extra confirmation when you delete images (Confirm On - Default), delete images immediately (Confirm Off), or you can disable deleting of images on the P+ back to avoid unintended loss of images.
  • Page 83 Configuration “Configuration” is used to setup general settings and perform general tasks on the P+ back. “Configuration” contains more menu entries than can be displayed on one screen. This is indicated by a double arrow pointing down on the right side. Scrolling past the last menu entry will reveal the next entry.
  • Page 84 Phase One recommends leaving disk checking turned on to maximize data security on memory cards. Read more about the Phase One Secure Storage system in the user guide referring to your digital Phase One back. Camera Mode Camera mode is used in special applications only.
  • Page 85 Power Save Power Save only has two options “Auto Shutdown” and “Backlight”. Auto Shutdown is used to set the time frame before the P+ back Shuts down, when there Is no activity. If the P+ back is automatically shut down it can only be woken up by pressing the “Power”...
  • Page 86 Phase One has made this easy by incorporating a large “L” in a parenthesis after the Language menu. Finding this “L” will help the user get native language back.
  • Page 87 Phase One is offering a newer firmware for your camera. Firmware might be made available in the download section at www.phaseone.com Before contacting your dealer or Phase One Support please make sure to have access to the “About“ box or write down the entire contents of the “About” box.

  • Page 88: 7.0 Custom Function

    7.0 Custom function Custom functions provides options to change the method for using or accessing the camera functions. The custom functions can store separate settings for 3 users. When at C-00, chose 1 (A), 2 (B), or 3 (C) to store a specific set of user function selections for the group of custom settings from C-01 to C-19.
  • Page 89 7.1 Custom Functions via P 40+ and P 65+ If your Phase One 645DF is equipped with a P 40+ or P 65+ back it is possible to select and adjust the Customs Functions via the back. Enter the Custom Functions menu by selecting Menu>645DF Setup, this menu will allow you to adjust Custom Functions.

  • Page 90: Types Of Custom Functions

    Types of custom functions C-04 Select battery [batt] This function is used to set the batteries used in the camera so that C-00 Custom functions profile [SEL] the remaining battery charge will be displayed correctly on the external 0: Last used (default=0) LCD panel.
  • Page 91 C-10 Half-press shutter release function mode [HALF] C-15 Flash sync. timing [FLSY] This function is used to set the AE lock and AF operations when the When shooting moving subjects with flash you can set the synchronization shutter button is half-pressed. timing.
  • Page 92 C-97 Support for Mamiya ZD backs This function should ONLY be activated when shooting on a Mamiya ZD back. 0: Default setting NO Mamiya ZD back on the camera body 1: Mamiya ZD back on camera body C-98 Lens firmware version The current firmware version can be checked.

  • Page 94: 7.3 Custom Dial Modes C1, C2 Or C3

    7.3 Custom Dial Modes C1, C2 or C3 Mode dial options “C1”, “C2” and “C3” can be used to store preferred settings. These settings can be changed instantly to suit the photographer's needs, you can change the settings on the camera body, or even easier on the back if you are working on P 65+ or P40+.
  • Page 95 Programming the Custom Dial Modes C1, C2 or C3 on the digital back If your Phase One 645DF is equipped with a P 40+ or P 65+ back you can adjust control the custom dial modes via the back. You can enter the custom dial modes menu by selecting Menu>645DF Setup, this menu will allow you to adjust custom dial modes (C1, C2, C3).

  • Page 96: Lenses And Multi Mount

    Functions of the Phase One lens The Phase One 80mm f/2.8 is a sharp and well tested digital lens. The lens is mounted by aligning the white dot on the lens with the white dot...

  • Page 97: Function Of The Phase One Lens Adaptor

    Function of the Phase One lens adaptor To mount the Phase One Multi-Mount, match the white dot on the camera up with the white dot on the Multi-Mount and turn slowly clockwise, NEVER use force to mount the ring. When the Phase One Multi-Mount is mounted you can fit Carl Zeiss/Hasselblad V and Hasselblad 200series lenses on the camera.

  • Page 98: List Of Alternative Lenses

    MC Arsat 600 f.8,0 Pentacon six Mirror Mamiya 45 f.2,8 Mamiya 645AFD Mamiya 55 f.2,8 Mamiya 645AFD Lenses usable in combination with Phase One Multi-Mount Mamiya 150 f.3,5 Mamiya 645AFD Carl Zeiss CFi 30 f.3,5 hasselblad V Mamiya 210 f.4,0...

  • Page 99: Lens Cast

    If working with large format cameras with tilt and swing, it is necessary to make a new calibration file if the tilt and swing position is changed. Phase One provides a solution in the Capture One software that helps removing the lens cast, called Lens Cast Calibration (LCC) By holding an opaque white plate in front of the lens it is possible to capture a calibration image.

  • Page 100: Simple Steps To Calibrate On Fixed Lenses (Mac)

    4 simple steps to calibrate on fixed lenses (MAC) 1. Hold the calibration plate in front of the fixed lens (as close as possible), and capture. In order to ensure correct exposure you may have to up a few f-stops or in a very dark setup, put on more light directly onto the plate.

  • Page 101: Simple Steps To Calibrate On Fixed Lenses (Pc)

    4 simple steps to calibrate on fixed lenses (PC) 1. Hold the calibration plate in front of the fixed lens (as close as possible), and capture. In order to ensure correct exposure you may have to open up a few f-stops or in a very dark setup, direct more light directly onto the plate.

  • Page 102: Large Format And Stitched Images (Pc)

    Large format and stitched images (PC) 1. Start by capturing the two calibration files and the two image files. 2. Save the left-side calibration file by clicking the “Generate…” button 3. Name the calibration file i.e.”CarsLeft”. 4. Save the right-side calibration file the same way. 5.

  • Page 104: Software

    Software Capture One, is a part of the new Phase One camera platform. For further information regarding functions of Capture One 5 please read the users guide for this, the user guide is found under the help menu on Windows and Mac.

  • Page 105: Importing From Cf Card

    Importing from CF card You can import images directly into your Capture One Session from a memory card inserted into a card reader. You can also easily brows to a disk containing RAW images on your local or network computer. Choose File >...

  • Page 106: 10.0 Large Format And Technical Cameras

    FlexAdapter is a sliding back used to connect a Phase One back to a large format camera. A ground glass is provided for initial set-up that slides over to position the digital back in the perfect orientation to the focused area.

  • Page 107: Technical Cameras

    For many photographers, quality cannot be compromised. A technical camera provides significantly more optical quality especially when combined with a Phase One back and Capture One software. The optical path is straight and simple with no mirror systems to worry about.

  • Page 108: 11.0 Maintenance

    A frequently used product should be inspected periodically at the If the Focusing Screen needs nearest official Phase One repair center. Should there be errors or cleaning, send it to the nearest malfunctions of camera, lens or back – do NOT try to repair – consult authorized Phase One service center.

  • Page 109: Battery Socket

    11.2 Battery socket Never leave batteries in the socket, if the camera or back is not supposed to be used for longer periods. Notice: Make sure to re-install the empty Keep contacts clean and dry at all times. battery case into the body. The empty battery cassette must be External battery socket inserted into the body.

  • Page 110: Camera Display Error-Notification

    11.4 Camera display error-notification When Any of These Displays Appear LCD display Causes and remedies Problems Remedies The camera caution mark will blink if the camera body detects an abnormality.

  • Page 111: Lens Maintenance

    Back Maintenance Cleaning the CCD When the Phase One P+ back is not attached to a camera, the camera back must be protected with the protection plate. However, over time dust may accumulate on the IR filter. This will degrade the image quality if not removed.

  • Page 112: Housing Specification

    11.7 housing specification Camera type : 6x4.5cm format, electronically controlled focal-plane shutter, TTL multiple mode AE, AF Flash synch : X contact point, 1/125 seconds. Synchro speed can be changed away from terminal. single lens reflex Flash control : TTL direct flash control, supports Metz SCA3002 system (SCA3952 Adapter) Actual Image size: 56x41.5 mm Mirror up shot : Select by pressing the mirror up button.

  • Page 113: P+ Series Technical Specifications

    2.2” QVGA TFT with 230,000 pixels, high brightness and contrast both indoor and outdoor, very fine details Results are based on testing in Phase One’s testing department. Variation may be expected due to specific camera set up. Battery used for test is new 2500mAh Li+.

  • Page 114: End User Support Policy

    Digital camera back pricing and repairs are also handled locally. If there is no local partner in your area, then please contact Phase One directly, and we will assist you directly or through one of our partners.
  • Page 115 The FAQ is a collection of the most frequently asked questions and related answers in the Phase One Knowledge Base. Use the FAQ as the first and best place to find answers on many technical questions. If you are seeking more detailed information about Capture One, Portrait One, or our Digital Backs, you can download user guides and manuals or watch some of the tutorials available.

  • Page 117: Compendium - Additional Texts

    COMPENDIUM - ADDITIONAL TEXTS TTL Flash photography on Phase One camera and Focal Plane shutter The below written text is a walk-through of most actions happening when using TTL flash TTL means it is through the lens, i.e. handled by the camera, and it should also be OTF (off the...

  • Page 118: Web Resources

    The user forum is a traditional forum, you can share experiences and find a few tip’n’tricks. Phase One Knowledge Base official Based on the extremely large database and experience of Phase One Support, the knowledge base can normally provide you the answer to almost any technical question.

Table of Contents

Save PDF