Resetting Devices To Factory Settings About Resetting Devices To Factory Settings; Resetting Zone Controls To Factory Settings; Resetting Keypads To Factory Settings; Resetting Pico Wireless Controls To Factory Settings - Lutron Electronics RadioRA-SR Setup Manual

Resetting devices to factory settings
About resetting devices to factory settings
Resetting devices to factory settings will remove them from the system and will clear all
programming. After being returned to factory settings, the devices will need to be reprogrammed as
part of a RadioRA -SR system. To reset a device to factory settings, perform the steps below.
®
Reset zone controls to factory settings
1. Triple tap and hold the tapswitch on a zone control. DO NOT
release the button after the third tap.
2. Keep the button pressed on the third tap until the status LEDs start
to scroll up and down quickly (approximately 3 seconds).
3. Release the button and immediately triple tap it again. The status
LEDs will scroll up and down slowly. When the LEDs stop scrolling,
the device has been returned to factory settings.
Reset keypads to factory settings
1. Triple tap and hold any scene button on a keypad. DO NOT release
the button after the third tap.
2. Keep the button pressed on the third tap until all the LEDs start to
flash slowly (approximately 3 seconds).
3. Release the button and immediately triple tap it again. The status
LEDs will flash quickly. When the LEDs stop flashing, the device
has been returned to factory settings.
Reset Pico wireless controls to factory settings
TM
1. Triple tap and hold either the top or bottom button on a Pico
wireless control. DO NOT release the button after the third tap.
2.
Keep the button pressed on the third tap until the LED next to the
top button turns on solid (approximately 3 seconds).
3. Release the button and immediately triple tap it again. The LED
next to the top button will flash quickly. When the LED stops
flashing, the device has been returned to factory settings.
|
30 Lutron
3X
+
hold
3X
+
hold
3X
+
hold
24/7 Technical Support—800.523.9466 24/7 Technical Support—800.523.9466
3X
3X
3X