Table of Contents
Advertisement
46
Wireless Thermostat Installation (Optional)
DO NOT CONNECT 120 VAC OR 24V TO THE THERMOSTAT CIRCUIT OF THIS HEATER
(DO NOT USE A HOUSEHOLD THERMOSTAT USED FOR A WALL-BOARD OR OTHER
ELECTRICAL HEATER). USE A LOW VOLTAGE COMPATIBLE THERMOSTAT.
Install the thermostat as follows:
Left Side of Stove
1. Remove the thumb screw holding the cover in place. Remove the cover.
2. Remove the two screws securing the access panel (5/16" nutdriver).
3. Open the access panel.
© Travis Industries
Optional Equipment
4012412
100-01270_000
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AGP and is the answer not in the manual?
Questions and answers