Configuring The Rib And Radio - Motorola GTX Service Manual

Foreword

Configuring the RIB and Radio

Configuring the RIB and Radio
1. Connect the RIB to the computer (Figure 2).
2. Plug the large 25-pin end of the HKN9857 programming cable into the RIB. The other end of this cable has
a "battery eliminator."
3. Slide the battery eliminator in place of the radio's battery.
4. Plug power supply 0180357A57 (120 Vac) or 0180358A56 (220 Vac) into a wall outlet, and connect the other
end to the RIB.
5. Connect the radio to a power supply and turn the volume control clockwise to turn it on.
xvi
GTX/GTX LTR/LTS 2000 Portable Radios Service Manual
68P02948C90-O February 1997