Summary of Contents for Web Mountain Technologies TIM-01
- Page 1 Web Mountain Technologies UPB Timer (TIM-01) Version 3 Revised May 10, 2007. For the latest revision, see www.webmtn.com/support/docs/TIM-01.pdf...
-
Page 2: Table Of Contents
7 On and Off Programs 8 Triggers 9 How to Program the UPB Timer 10 Immediate Run 11 Reset 12 Emergency Mode 13 Random Timers 14 Trouble Shooting 15 Support 16 Warranty 17 Other UPB Products UPB Timer (TIM-01) Version 3... -
Page 3: Summary
You can keep the TIM-01 UPB Timer by your bedside to manually turn off your child’s radio or night light or to dim your bedside lamp. You can turn on ALL lights connected to Lamp Modules and Wall Switch Modules with the touch of a button if you hear a suspicious noise at night. You can even turn off everything in the system with one button. -
Page 4: Quick Start - Scheduled Programs
Move to the NID field with the RIGHT button and use the UP/DOWN buttons to set the NID to be the same as the UPB Network ID used for all the other UPB devices installed in this home. Review your settings, and if they are correct, push the ENTER button to save them. The Timer will revert to the RUN screen. UPB Timer (TIM-01) Version 3... -
Page 5: Quick Start - Countdown Timer
Set up a Trigger to watch for a UPB Link, wait a defined amount of time, then issue another Link: Push the MENU button until the SET screen is displayed. Use the UP/DOWN buttons to change the first field from a P to a T. Notice that the screen changes as follows: UPB Timer (TIM-01) Version 3... -
Page 6: Upb Operations
Adjacent homes should use different Network IDs, in order to prevent signals in one home from controlling devices in the house next door. The appropriate range for Network IDs is 1 – 250. The Network ID is the critical item that must be known in order for the TIM-01 UPB Timer to operate a given UPB installation. -
Page 7: On And Off Programs
TIM-01 User Manual The only way the TIM-01 Timer can control UPB devices is by issuing Link commands, therefore every device to be controlled must be associated with one or more Links and the behavior of each of those Links must be defined for each device to be controlled by that Link. UPB devices and Links cannot be adequately set up by manual means –... - Page 8 Link field. Refer to the previous section for information on setting all other program fields. • Triggers for delay timers: You get to this screen by pushing the MENU button until you get to the SET screen, then pushing UP/DOWN to change the first field from P to T. UPB Timer (TIM-01) Version 3...
- Page 9 FUNCTION to go back to RUN mode or wait one minute for the Timer to go back to RUN mode automatically. • DELETE PROGRAMs or TRIGGERs (press the MENU button until DELETE is displayed): UPB Timer (TIM-01) Version 3...
- Page 10 The default for UPB Network ID (NID) is 1. See the UPB Operations section (earlier) for more information about this value. NOTE: If you do not set this value correctly, you will NOT be able to control UPB devices in your home. Use UP/DOWN to set the NID to desired value (1 – 250). UPB Timer (TIM-01) Version 3...
- Page 11 TIM-01 User Manual The TIM-01 UPB Timer can operate as an Emergency or Panic button, turning on all lights in the house to indicate an emergency situation. The user defines the EMERGENCY action by creating a UPB Link that performs according to the user’s desires (see the preceding section on UPB Operations for more details on setting up UPB Links).
- Page 12 You can use the TIM-01 in place of a Web Mountain SPIM-01. You must connect a serial cable between the serial port on your computer or server and the serial port at the bottom of the TIM-01. While the timer is in PIM mode, it will continue to keep accurate time, but it will NOT execute any programs or triggers, the Immediate Action buttons will not operate and you can not utilize the Emergency function.
-
Page 13: Immediate Run
Timer. To reset it, disconnect the power plug, wait 5 seconds, then hold the LEFT and RIGHT buttons down simultaneously, keeping them both depressed as you plug the power cord back into a receptacle. You should see the following screen: UPB Timer (TIM-01) Version 3... -
Page 14: Emergency Mode
2 seconds per day. If this level of accuracy is not satisfactory, this function should offer a more accurate time function. Whether this function is used or not, a TIM-01 product is not warranted for accuracy any better than +/- 2 seconds per day. -
Page 15: Support
Support section for information on a Timer. replacement. 15 Support If you are an OLP franchise owner, please call B and B Manufacturing. If you are not an OLP franchisee, please call Web Mountain Technologies at 303-627-1856 or visit www.webmtn.com for support. -
Page 16: Warranty
17 Other UPB Products Web Mountain Technologies sells a broad range of UPB products as well as a line of residential servers that greatly enhance control over UPB systems. For more information about these products and to see what’s new, visit either www.digitalAVnew.com...
Need help?
Do you have a question about the TIM-01 and is the answer not in the manual?
Questions and answers