Clock Setting - Kenwood K25MW12 Instruction Manual

clock setting

When the microwave is connected to the mains power, the LED display will flash ":". Please ensure
that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the clock button.
2. Press the numeric (0-9) buttons and enter
the time. For example, to input the current
time 12:30, you need to press "1", "2", "3",
"0". The input hour has to be within 1-12
and the input minutes has to be within
0-59.
3. Press the clock button again to complete
the clock setting.
• This is a 12-hour clock. When the
microwave is first plugged in or
when power resumes after a power
interruption, the LED display will
show "Enter Clock Time". Press
the reset button if you prefer not to
display the clock.
• When programming settings, the
microwave will beep to alert you
to whether your input is correct or
rejected:
1 beep: entry is correct
2 beeps: entry is wrong, check and
K25MW12_IB_final RC120530.indd 13
try again.
ENTER TIMER CODE AMT COOK
CLOCK DEF MEM G
baked potato popcorn
pizza beverage
frozen dinner reheat
1 2
4 5
7 8
1, 3 0
clock
power
timer
level
defrost cook by
by weight weight
speed start
defrost stop
TIMER
LOCK
3
2
6
9
reset
cook
13
30/05/2012 11:37 AM