Reading Sv8100 Dim Traces - NEC Univerge SV8100 System Maintenance Manual

UNIVERGE SV8100
R
S 9
EADING
ECTION
The DIM trace can be partly decoded by the engineer but only NEC Infrontia Japan
can decode the full trace.
This section describes the basic decode to enable the engineer to identify the
extension and trunk port number.
System Maintenance Manual
SV8100 DIM T
Extensions
Each extension type has a unique logical port type as shown below.
Type
Key telephone
SLIU
S-Point
DECT
The port number is identified by the two digits (in hexadecimal) following the
logical port type. The two digits are 00 to ff hexadecimal (00 to 255 in decimal).
(example: keytelephone port 1 will be 0401 as shown below.)
>>>> PORT : 0401H STATUS 0000H => 0002H
Trunks
Each trunk type has a unique logical port type as shown below.
Type
COIU
ISDN
The port number is identified by the two digits (in hexadecimal) following the
logical port type. The two digits are 00 to ff hexadecimal (00 to 255 in decimal).
(example: ISDN port 17 will be 3411 as shown below.)
>>>> PORT : 3411H STATUS 00D0H => 00B1H
RACES
Logical ID
Logical ID
Issue 1.0
04
00
4c
e9
0c
34
3 - 23