Panasonic KX-TDE100 Installation Manual page 158
Pure ip-pbx
Hide thumbs
Also See for KX-TDE100:
- Programming manual (1018 pages) ,
- Pc programming manual (982 pages) ,
- Features manual (470 pages)
Table of Contents
Advertisement
5.1.1 Installation
PROBLEM
The LINK indicator of the
IP-EXT/IP-GW/IPCMPR
does not turn on.
158
Installation Manual
PROBABLE CAUSE
•
IP-EXT/IP-GW card
malfunction
•
IPCMPR card
malfunction
•
Poor connection
•
Network malfunction
SOLUTION
•
Replace the corresponding card.
•
Replace the IPCMPR card (be sure to turn
off the PBX when replacing).
•
Make sure that an 8-pin twisted pair cable
is used for connection.
•
Make sure that none of the CAT 5 cables
in use are over 100 m (328 ft) in length.
•
Make sure that a straight cable is used for
connection to a switching hub.
•
Make sure that all network devices in use
are switched on.
Document Version 2011-10
Advertisement
Table of Contents
Troubleshooting
