Olympus E-300 Quick Manual

Hide thumbs Also See for E-300:

See also: Advanced Manual , Basic Manual

Preparing Your Camera to Programming of Dandelion

1. Set the camera to MF (manual focus) mode

2. Set exposure mode A

3. Set EV STEP (exposure value step) to 1/3 EV

4. Set the Fn function button to PREVIEW mode (Depth of Field preview).

For step 4 browse your camera's instruction manual: depending on the model, Fn button can be

located in a different place and may be customized in a different way.

In Olympus E-300 OK button can be

customized to perform PREVIEW

function.

In Olympus E-330 there is a special

button for customizing the PREVIEW

function

In Olympus E-400 a

round

button

located

near

the

controller.

Table of Contents

Do you have a question about the E-300 and is the answer not in the manual?

Page 1 For step 4 browse your camera's instruction manual: depending on the model, Fn button can be located in a different place and may be customized in a different way. In Olympus E-300 OK button can be customized to perform PREVIEW function.
Page 2 In Olympus E-410 "<" button (left arrow) functions button. The same for Olympus E-420. Olympu s E-500 One-to uch WB button is used. In Olympus E-510 th ere is a special Fn button.
Page 3 Dandelion performs the command, instead of displaying aperture sign "-.-" the camera will offer to reboot. In this case you will not need the lens reset function. You can do the same with Olympus cameras, that is instead of pressing the PREVIEW button you can make shots.
Page 4: Before You Start
Programming of Dandelion for Olympus and Panasonic Before you start Prepare your camera as described as in part I Programming of Dandelion is simple and includes three steps: 1. Activation of the program mode 2. Command input 3. Data input Activate program mode in Dandelion.
Page 5 F5.6 + 5 digits - focal length change. The digits are to be entered from greatest to least. If the focal length is less than 5 digits, add zeros. For example for 50mm: 00050. All five digits have to be entered.