Assembly Instructions For Accessories; Mounting Cosmetic Backs To A Bulkhead - Rosen Aviation 0700-104 Technical Manual

Rosen Aviation

4. ASSEMBLY INSTRUCTIONS FOR ACCESSORIES

This section provides instructions about how to assemble the cosmetic backs and bezels. To add
a stylish, proud-mount option, mount the cosmetic back to the bulkhead, attach the RDM to the
cosmetic back, and then snap on the bezel.
Note: Protect cosmetic and sensitive components from scratches, nicks, and debris during
hardware installation.

4.1. Mounting Cosmetic Backs to a Bulkhead

The cosmetic backs use two styles of mounting brackets depending on the size of RDM that you
install. The cosmetic backs are a universal fit—there is no top or bottom.
Technical drawings for the Remote Display System accessories are available on the Rosen
website at www.rosenaviation.com.
Attach the 19", 22", 24", and 26" cosmetic back to the bulkhead using the four mounting brackets
and a minimum of four FHP screws (customer supplied) in the .188 mounting holes, as shown
below.
Attach to
bulkhead
Attach to
RDM
Figure 3 1901-, 2401-, 2201-, and 2601-800 cosmetic back mounting tabs
Document Number: 105478
Template: 4.4.1.6FM2; Revision A; 12/06/12
Remote Display System
Revision:
Date: 06/23/14
Page 8 of 38
F