Marquis SPIRIT Operating And Troubleshooting Manual

LIGHT
O
JET
AUXILIARY JET
CONTROL PANEL
O
JET
TEMP +-
PAGE 38
MARQUIS SPAS
spa control operation
THE SPIRIT, MIRAGE, AND WISH
UNDERWATER AND ENTRYWAY LIGHTS
Press the LIGHT pad to turn the underwater and
entryway lights on and off. The low-voltage system
produces a night light for evening use and makes
entering and exiting the spa safer. After being on for
30 minutes, the lights automatically turn off.
OPTIONAL WATERCOLORS™*
Press LIGHT pad to turn on step one. Press LIGHT
pad again to turn off for one second. Then press
LIGHT pad again for step two. Repeat for all eight
options: 1) color wash, 2) white, 3) blue/green, 4)
violet, 5) blue, 6) yellow, 7) green, 8) red.
*(12 LED)
JETS
Use the JET pad on the bather panel or auxiliary jet
control panel. First press of the JET pad activates
pump on low-speed (and starts soak timer). Second
press of the JET pad activates pump on high-speed.
Third press of the JET pad turns jets off for all-quiet
mode. Fourth press of the JET pad turns pump back
to low-speed. If the pump is already on low (heating,
filter cycle) then the first press starts the soak timer.
After running on low- or high-speed for 15 minutes,
the pump automatically turns off (unless in heating
or filtering cycle).
SOAK TIMER AND SOAK FEATURE
The soak timer starts the first time you press a JET
pad. The LCD window displays the elapsed time (1-
30) for 55 seconds then switches to the current
water temperature for five seconds then back to the
timer. It continues to alternate for the entire 30
minutes. The timer runs for 30 minutes regardless of
other functions in use (jets, temperature, or light).
You can manually cancel the timer by pressing the
TEMP+- pad and then the LIGHT pad.