Aux In - Yamaha Disklavier Operation Manual

AUX IN

You can also connect an external device such as a
CD player or tape recorder to the Disklavier and
play along with your favorite recording.
Amplifier
MAINS
AUX OUT AUX IN VOLUME BASS TREBLE
L/L+R R L/L+R R
AUX IN
HEADPHONE OUT
1
With the Disklavier turned off,
use an audio cable (optional) to
connect the HEADPHONE jack or
LINE OUT jack on the external
device to which you want to
connect to the AUX IN connectors
on the Amplifier.
2
Turn on the external device, then
turn on the Disklavier.
3
Gradually turn up the volume on
the external device until a
desirable volume is obtained.
Note: The volume of the Amplifier is linked
with the AUX IN connectors. Make
sure the VOLUME knob on the
Amplifier is set to an appropriately
audible level. If it is turned fully
counterclockwise, no sound may be
produced even when you adjust the
volume on the external device.
HEADPHONE OUT
(LINE OUT)
With many external devices, volume cannot
be adjusted for sound that is output from
the LINE OUT jack. In this case, use the
headphone jack on the external device
instead of the LINE OUT jack.
<For models with Silent system>
You may also need to adjust the volume of
the digital piano using the VOLUME knob
on the Silent Control Box.
43