Do you have a question about the 180 BR and is the answer not in the manual?
Questions and answers
Pat
March 12, 2025
air in the fresh water pump line
1 comments:
Mr. Anderson
March 12, 2025
To remove air from the freshwater pump line on a Crownline 180 BR, follow these steps:
1. Turn off the water heater, if equipped. 2. Open all faucets to allow the pump to empty the water tank and intake lines. 3. Run the pump dry for one to two minutes before turning it off. 4. Open all drains. 5. Disconnect the discharge and intake hoses from the pump. 6. Allow the pump to run to force all water and air out of the unit. 7. Reconnect all hoses, close all drains, and leave all faucets open. 8. Remove the water pump fuse to prevent cycling during storage.
This process ensures that air is purged from the system.
Need help?
Do you have a question about the 180 BR and is the answer not in the manual?
Questions and answers
air in the fresh water pump line
To remove air from the freshwater pump line on a Crownline 180 BR, follow these steps:
1. Turn off the water heater, if equipped.
2. Open all faucets to allow the pump to empty the water tank and intake lines.
3. Run the pump dry for one to two minutes before turning it off.
4. Open all drains.
5. Disconnect the discharge and intake hoses from the pump.
6. Allow the pump to run to force all water and air out of the unit.
7. Reconnect all hoses, close all drains, and leave all faucets open.
8. Remove the water pump fuse to prevent cycling during storage.
This process ensures that air is purged from the system.
This answer is automatically generated
Where to find the hours on an engine