1. Manuals
  2. Brands
  3. Creative Playthings Manuals
  4. Swing Set
  5. Playtime PS10FRA
  6. Assembly manual

Creative Playthings Playtime PS10FRA Assembly Manual

Playtime swing sets
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL PS10FRA
ASSEMBLY MANUAL
Model PS10FRA with
Top Ladder
Model PS10FRA with
Swing Beam
If you have problems or questions about your Creative Playthings Playset,
Contact Creative Playthings Customer Service at 1-800-833-4001 or
All hardware on this set is specially coated
for corrosion resistance.
If non-Creative Playthings hardware is used,
it must be galvanized or stainless steel.
This product is intended for single
family home/residential use only and
not intended for use in any public
setting. Placement in any public
setting constitutes a misuse of this
product.
DO NOT CALL THE RETAILER.
customerservice@creativeplaythings.com
™
Please read the owner's manual before assem-
bling your Playset, it provides additional
information on the care and use of your
Playset.
You must carefully read the entire instruction
manual before proceeding with the assembly
or use of your new Playset.
Creative Playthings takes great care to de-
sign its products with your child's safety in
mind. However, only with careful supervi-
sion and proper safety instructions, can you
be assured of safe play time on any product
designed for children.
By

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Playtime PS10FRA and is the answer not in the manual?

Questions and answers

Related Manuals for Creative Playthings Playtime PS10FRA

Summary of Contents for Creative Playthings Playtime PS10FRA

  • Page 1 Model PS10FRA with Top Ladder Model PS10FRA with Swing Beam If you have problems or questions about your Creative Playthings Playset, DO NOT CALL THE RETAILER. Contact Creative Playthings Customer Service at 1-800-833-4001 or customerservice@creativeplaythings.com Please read the owner’s manual before assem-...

  • Page 2: Assembly Safety

    Hanging accessories MUST be removed prior to using overhead monkey bars. Do not allow children under age 7 to use monkey bars unless supported by an adult. by Creative Playthings include; Dog runs, clothes lines, electrical devices, or bird feeders etc. and Wooden Lawn Swing Glider.

  • Page 3: Safe Play Area

    Whichever is greater (4.27 M) Landscape Timbers 6' from (2 M) play structure. A FALL ONTO A HARD SURFACE COULD RESULT IN SERIOUS INJURY. MODEL PS10FRA © Copyright 2010, Creative Playthings. Printed in U.S.A. Page 3 19766-100 Rev B (05-10)

  • Page 4: Hardware Bag Contents

    Lag Screw 1/4 x 1-1/2" 17036-1201 Lag Screw 1/4 x 3" 17036-1601 Lag Screw 1/4 x 4" We have packaged more hardware than is required for assembly. MODEL PS10FRA Page 4 © Copyright 2010, Creative Playthings. Printed in U.S.A. 19766-100 Rev B (05-10)

  • Page 5: Pre Assembly Information

    It is very important to make cer- a socket to tighten. tain that the tops of all screws are and there are no protruding sharp edges. MODEL PS10FRA © Copyright 2010, Creative Playthings. Printed in U.S.A. 19766-100 Rev B (05-10)
  • Page 6 Telescope 2 40321-400 Sling Swing, Green w/Chain 2 40009-400 Sling Swing, Green w/Rope 1 40311-402 Ring Trapeze Assembly w/Chain 1 40381-100 Plastic Ring Trap Combo, Yellow MODEL PS10FRA © Copyright 2010, Creative Playthings. Printed in U.S.A. 19766-100 Rev B (05-10)
  • Page 7 50459-700 Franklin Hardware Master Pack 50475-100 Playtime Playpack 1 AN 4 33192-102 Narrow Wall Slat 5/4 x 4 x 23-1/2" 8515-202 8 Ft Green Wave Slide MODEL PS10FRA © Copyright 2010, Creative Playthings. Printed in U.S.A. Page 7 19766-100 Rev B (05-10)

  • Page 8: Maintenance Instructions

    Maintenance: depending on weather climate. rusted or structural pieces have signs of premature failure; replace them through Creative Playthings Customer Service. indoors when outside temperatures drop below 32° F (0° C). are a natural characteristic of all wood and will not affect the strength or durability of the wooden components.

  • Page 9: Step 1 - Base Components

    (F) using one 1/4" x 4" Hex Bolt Assembly. Stand the components up and fasten to the assembly from step 2, using a 1/4" x 2-1/2" Hex Bolt Assembly. MODEL PS10FRA © Copyright 2010, Creative Playthings. Printed in U.S.A. 19766-100 Rev B (05-10)
  • Page 10 Corner Posts using the holes 44-1/2" from the bottom with Four 1/4" x 2-1/2" Hex Bolt Assemblies. Repeat with the Right Platform Side (AI) on the inside of the Right Corner Posts. MODEL PS10FRA Page 10 © Copyright 2010, Creative Playthings. Printed in U.S.A. 19766-100 Rev B (05-10)
  • Page 11 Corner Posts using 1/4" x 2-1/2" Hex Bolt Assemblies. Loosely attach the top of the Angle Braces to the Platform End or Platform Back using 1/4" x 2-1/2" Hex Bolt Assem- blies. MODEL PS10FRA © Copyright 2010, Creative Playthings. Printed in U.S.A. Page 11 19766-100 Rev B (05-10)

  • Page 12: Step 10 - Side Supports

    Angle Braces to the Plat- form Ends. Posts using #10 x 2" Flat Head Wood Screws in the holes provided. STEP 12 – Platform Boards: Wood Screws. MODEL PS10FRA Page 12 © Copyright 2010, Creative Playthings. Printed in U.S.A. 19766-100 Rev B (05-10)
  • Page 13 1/4" x 2-1/2" Hex Bolt Assemblies as shown. Fasten the Tent & Rope Support (J) to the Right Corner Posts using four 1/4" x 2-1/2" Hex Bolt Assemblies as shown. MODEL PS10FRA © Copyright 2010, Creative Playthings. Printed in U.S.A. Page 13 19766-100 Rev B (05-10)
  • Page 14 STEP 18 – Tent Beam: Fasten the Tent Beam (AM) to the Tent Posts as shown. Use two #10 x 3" Screws at each end. MODEL PS10FRA Page 14 © Copyright 2010, Creative Playthings. Printed in U.S.A. 19766-100 Rev B (05-10)
  • Page 15 Position the Access Ladder Assembly against the Right Plat- form Side. Fasten the Access Ladder Brackets to the Right Platform Side using 5/16 x 1-1/2" Hex Bolt Assemblies, as shown. Tighten all hardware. MODEL PS10FRA © Copyright 2010, Creative Playthings. Printed in U.S.A. 19766-100 Rev B (05-10)
  • Page 16 Rock Boards as shown in the illustration. Finish by with the Bottom Board in the lowest position. rights for each #10 x 2" Wood Screw. 3-1/4" MODEL PS10FRA © Copyright 2010, Creative Playthings. Printed in U.S.A. 19766-100 Rev B (05-10)
  • Page 17 1-1/2" Flat Head Wood Screws. The top of the Slat should 2-1/2". be approximately 1" below the top edge of the End Wall Sup- port. MODEL PS10FRA © Copyright 2010, Creative Playthings. Printed in U.S.A. Page 17 19766-100 Rev B (05-10)
  • Page 18 Center the Filler Straps (S2) in the space between each ing two #10 x 1-1/2" Screws each. Do NOT install the Filler Straps on a gym with a Swing Beam. MODEL PS10FRA Page 18 © Copyright 2010, Creative Playthings. Printed in U.S.A. 19766-100 Rev B (05-10)
  • Page 19 At the bottom, pull the rope through the holes in the Bottom Rope Ladder Support until the rope is tight. Tie the bottom end of the Rope Ladder; leave no slack in the rope. MODEL PS10FRA © Copyright 2010, Creative Playthings. Printed in U.S.A. 19766-100 Rev B (05-10)

  • Page 20: Step 34 - Ground Stakes

    Save all instruction sheets and receipts in case it becomes necessary to contact Creative Playthings for warranty service and/or part replacement. The warranty can be found in your Owner’s Manual. will allow us to quickly process warranty claims.

Table of Contents