Download
Share
Print this page
Janome Horizon Memory Craft 15000 Owner's Manual
  1. Manuals
  2. Brands
  3. Janome Manuals
  4. Sewing Machine
  5. Horizon Memory Craft 15000
  6. Owner's manual

Janome Horizon Memory Craft 15000 Owner's Manual

New owner lesson
Hide thumbs Also See for Horizon Memory Craft 15000:

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Horizon Memory Craft 15000 – New Owner Lesson
Ordinary Sewing Session:
• MC15000
• Embroidery Unit
• Power cord
• Knee Lift
• All packaged accessories
• Laptop with Horizon Link Installed
• USB cable
• Or if using PC USB flash drive

Ordinary Sewing

1. Getting Ready to Sew.
a. Attach Embroidery Unit.
• Attach foot control with remote cutter.
• Turn on Machine.
• Activate HighLight
• Attach AcuView
Magnifier.
®
b. Touch Help.
• View Winding bobbin; then wind a bobbin.
• View Threading Machine; then thread machine.
c. Attach the knee lift. Use the knee lift to raise and lower the presser foot.
• Use the Presser Foot Lifter to raise and lower the presser foot.
• Use the Presser Foot Lifter Button
Memory Craft 15000
.
®
to raise and lower the presser foot.
Horizon Memory Craft 15000
Fabric:
• Several 6" squares of cotton
• Two 2" squares of cotton for applique
• Several 6" squares of tear away stabilizer
• Several 6" squares of batting
•
⁄
"-½" button
1
4
• All-purpose sewing thread
Join us!
www.janome.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Horizon Memory Craft 15000 and is the answer not in the manual?

Questions and answers

Related Manuals for Janome Horizon Memory Craft 15000

Summary of Contents for Janome Horizon Memory Craft 15000

  • Page 1: Ordinary Sewing

    Horizon Memory Craft 15000 Horizon Memory Craft 15000 – New Owner Lesson Fabric: Ordinary Sewing Session: • Several 6” squares of cotton • MC15000 • Embroidery Unit • Two 2” squares of cotton for applique • Power cord • Several 6” squares of tear away stabilizer •...
  • Page 2 Horizon Memory Craft 15000 2. Customize Machine Settings (use stylus to touch the screen). a. Touch Set Mode. • Common Set , these functions control the entire machine. • Page 1/5 select Inch or MM - user’s choice. • Touch Ordinary Set , these settings control functions in the ordinary sewing mode.
  • Page 3 Horizon Memory Craft 15000 desired speed. Close to the end of the seam, Press and Hold the start button: the machine will slow down and when the end of the fabric is under the needle release the button and the machine will stop.
  • Page 4 Horizon Memory Craft 15000 • Rolled hem • Zipper • Concealed zipper • Button sewing • Tacking • Appliqué • Patchwork • Quilting b. Touch Appliqué. Attach the Satin Stitch foot F. Select Appliqué “M”. Touch the Cornering button , it will change to the corner icon.
  • Page 5 Horizon Memory Craft 15000 d. Touch Quilting. • Touch Straight Stitch. Touch the dual feed button. The machine will indicate to use the AcuFeed Flex Dual Feed foot. Attach foot AD and dual feed holder. Make a quilt sandwich and sew several rows of quilting.
  • Page 6 Horizon Memory Craft 15000 • Touch the combine button to turn off the combine mode. • Touch the Open icon. Touch the Ordf folder, touch “shoes” to open the saved design. d. Touch Home, select Lettering mode (the shoes are still in the stitch display bar).
  • Page 7 Horizon Memory Craft 15000 • Select the Monogram Tab. • The same lettering fonts from the machine are available in Horizon Link Suite. Select 9mm Block Type in your name. • Click the Home tab, click Send. A message will appear stating the stitch pattern on the machine will be erased, click Yes.

  • Page 8: Embroidery Mode

    Horizon Memory Craft 15000 • Click Write a Design. • Select built in from the pop up window. Click the red arrow to send the design to the machine. • On the machine, touch Home. Select Decorative mode, select Created Stitches, select the bow.
  • Page 9 Thread the machine with embroidery thread and the Janome Prewound bobbin. • Janome Blue tip, Red tip and Purple tip needles are the recommend needles for embroidery. These needles have been designed with a larger eye and scarf to allow the embroidery threads to flow and lay smoothly on the fabric. The Blue Tip is a size 11/75 ball point needle and should be used with most embroidery threads.
  • Page 10 Horizon Memory Craft 15000 d. Resume mode, ON. When the Resume function is on, the machine will “resume” the design as well as the last stitch sewn when the machine was turned off. A pop up window will appear when the machine is turned asking if the user wants to resume the embroidery design.
  • Page 11 Horizon Memory Craft 15000 3. Wireless Connectivity. a. Touch Set, select wireless. b. Refer to pages 100-102 in the instruction manual to set up the machine with a wireless connection to your router. 4. iPad Option: AcuEdit. a. On the iPad locate:Settings > Wi-Fi > Choose the same network that the machine is connected to.
  • Page 12 Horizon Memory Craft 15000 o. Select your machine and then touch Done. p. Touch the Send icon in the upper left tool bar. AcuMonitor a. On the iPad openAcuMonitor. b. Touch Target Machine in the upper right tool bar. Done.
  • Page 13 Horizon Memory Craft 15000 l. Edit tab > Copy & Paste > Move to right. m. Style tab > Micro Gothic > Horizontal. n. Type “MC15000” > Enter. o. Move to bottom of skirt. p. Edit Tab >Hold Control and select all of the designs in the Design List.
  • Page 14 Move to the lower left hand corner. i. Click Corner. j. Next. k. Write a Design. l. Write the design to the machine or USB memory stick. Note: More lessons for AcuFil can be found at http://content.janome.com/index.cfm/ProjectCenter/Webinars. Memory Craft 15000 Join us! www.janome.com...