Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning.
Page 6
Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com Optional documentation Your product package may include optional documentation that may have been added by your dealer.
® Thank you for purchasing the ASUS LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual...
Assembling the monitor To assemble the monitor: Place the display flat on a cloth on the table, assemble the base according to the drawing and use a coin to turn the screw tight. Put the cable clip inset the hole of stand, and adjust the monitor to the angle that is most comfortable for you. Chapter 1: Product Introduction...
Connect cables 1.4.1 Rear of the LCD monitor HDMI AC-IN Port DVI Port HDMI Port DisplayPort VGA Port Audio - in Port Earphone - out Port Kensington Lock ASUS LCD Monitor PB278 Series...
Monitor introduction 1.5.1 Using the Controls button Use the control button on the back of the monitor to adjust the image settings. Standard Mode DisplayPort 2560x1440@60Hz Menu QuickFit Input Select Close Brightness Splendid Power Button/Power Indicator: • Press this button to turn the monitor on/off. • The color definition of the power indicator is as the below table.
Page 11
PB278QR) or DisplayPort input signal. Close Button • Exit the OSD menu. Shortcut key1 • This is a Shortcut key. The default setting is Brightness. Shortcut key2 • This is a Shortcut key. The default setting is Splendid. ASUS LCD Monitor PB278 Series...
1.5.2 QuickFit Function The QuickFit function contains three patterns: (1) Grid (2) Paper size (3) Photo size. Grid pattern: Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel. Alignment Grid Paper size: Provides users to view their documents in real size on the screen.
Figure 2 • The VESA wall mount kit ( 100 x 100 mm) is purchased separately. • Use only the UL Listed Wall Mount Bracket with minimum weight/load 28.8 kg (Screw size: M4 x 10 mm). ASUS LCD Monitor PB278 Series...
Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle.
or buttons, according to the indicators on the menu, to make your changes. Select the to return to previous menu or to accept and return to previous menu. ASUS LCD Monitor PB278 Series...
3.1.2 OSD Function Introduction Splendid This function contains eight sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode. PB278 Standard Mode Display Port 2560x1440@60Hz Splendid Scenery mode Color...
Page 17
• Skin Tone: Contains three color modes including Reddish, Natural, and Yellowish. • In the User Mode, colors of R (Red), G (Green), and B (Blue) are user- configurable; the adjusting range is from 0 ~ 100. ASUS LCD Monitor PB278 Series...
0 to faster 100. • Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”, “1:1”, “Overscan”. • VividPixel: ASUS Exclusive Technology that brings lifelike visuals for crystal-clear and detail-oriented enjoyment. The adjusting range is from 0 to 100.
Page 19
Display Port 2560x1440 @ 60Hz Splendid PIP/PBP Mode PIP/PBP Source Color Image Size Position Sound PIP/PBP Setting Aspect Control Input Select Swap System Setup Shortcut By activating this function, this monitor displays two pictures from two different video sources. ASUS LCD Monitor PB278 Series...
• PIP/PBP Mode: Selects PIP or PBP function, or turn it off. • PIP/PBP Source: Selects the video input source among,“VGA”, “DVI”, “HDMI / MHL”, or “DisplayPort”. • Size: Adjust the PIP size to “Small”, “Middle”, or “Large”. • Position: Adjusts the position of PIP sub-window to “Right-Top”, “Left- Top”, “Right-Bottom”...
Particularly, Aimpoint function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games. To active GamePlus: • Select ON to enter the GamePlus main menu. • Press to select between Aimpoint and Timer function. ASUS LCD Monitor PB278 Series...
Page 22
• Press to confirm the function you choose. Press to go back. Press to go off, and exit. GamePlus main menu GamePlus-Aimpoint GamePlus Aimpoint Timer (Practice Mode) GamePlus main-Timer GamePlus main-Timer-Position Position • ECO Mode: Activate the ecology mode for power saving. • OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the OSD screen.
Page 23
“GamePlus” and set as shortcut key. The default setting is Brightness. • Shortcut 2: User can select from “Splendid”, “Brightness”, “AUTO Adjust”,“Contrast”, “PIP/PBP Setting”, “Color Temp.”, “Volume”, “GamePlus” and set as shortcut key. The default setting is Splendid. ASUS LCD Monitor PB278 Series...
• Adjust the volume settings of both your monitor and computer. • Make sure the computer sound card driver is properly installed and activated. • Make sure the audio source is correct on the OSD. ASUS LCD Monitor PB278 Series 3-11...
Page 27
59.94 / 60Hz 67.433 / 67.5kHz * The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables. ASUS LCD Monitor PB278 Series 3-13...
Need help?
Do you have a question about the PB278 Series and is the answer not in the manual?
Questions and answers