Table of Contents
Advertisement
54
EN
VCR/TV Connection (when connecting directly to the camcorder)
1
CONNECT CAMCORDER TO TV OR
VCR
Pull out the jack cover and open it. Connect as
shown in the illustration.
If Using A VCR . . . go to step 2.
If not . . . go to step 3.
2
CONNECT VCR OUTPUT TO TV
INPUT
Refer to your VCR's instruction manual.
3
TURN ON POWER
Turn the Power Dial to "PLAY" and turn on the
TV/VCR.
4
SELECT TV'S VIDEO MODE
Set the TV to the channel or mode appropriate
for video playback.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time, Time Code
.... set to "ON" or "OFF" in the Playback Menu
(
pg. 52).
• Playback Sound Mode Display
.... Set the Power Dial to "
button, and set "ON SCREEN" in the Date/
Time Menu (
Then set the Power Dial back to "PLAY".
MIC
To AV OUT
DC-IN
Open the
jack cover.
VIDEO/AUDIO cable (provided)
(ø3.5, camcorder to TV or VCR)
Cable adapter (provided)
If your VCR has the 21 pin AV input connector (SCART),
use the provided cable adapter.
", press the MENU
M
pg. 11) to "ON" or "OFF".
PLAYBACK
VIDEO OUT select switch (set to CVBS)
To VIDEO/AUDIO IN
connectors
NOTES:
Turn on the TV/VCR after connection is com-
pleted. Otherwise damage to this unit and other
equipment may result.
Input mode setting varies depending on the type
of TV used. Refer to your TV's instruction manual.
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
To keep the camcorder's display from appearing
on the TV screen during playback, press the
IND.ON/OFF button for longer than 1 second.
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (
pg. 10)
Never connect any other cable than the provided
VIDEO/AUDIO cable to the camcorder's AV
OUT jack.
While the VIDEO/AUDIO cable is connected to
the AV OUT jack, sound cannot be heard from
the speaker.
Basic Connections
To TV or VCR
VCR
Advertisement
Table of Contents
