Front Interior Light - Mercedes-Benz Sprinter Operator's Manual

Changing bulbs
106
Disconnect cable connector =.
X
Unscrew bulb holder ;.
X
Remove the bulb from bulb holder ;.
X
Press the new bulb into bulb holder ;.
X
Screw bulb holder ; into courtesy
X
light :.
Connect cable connector =.
X
The connector locking spring must engage.
Align courtesy light : on the side and
X
engage.
Interior lighting
General notes
! Have the bulbs in the overhead control
panel replaced at a qualified specialist
workshop. You could otherwise damage
the overhead control panel.

Front interior light

Type of lamp: K 18 W
Switch off the interior lighting.
X
Press spring catch ; in the direction of the
X
arrow and lift off interior light :.
Remove bulb = from the bulb holder.
X
Insert new bulb =.
X
Align interior light : on the right-hand side
X
and engage the spring catch.
Rear interior light
Interior light with switch
Interior light without switch
Type of lamp: K 15 W
Switch off the interior lighting.
X
Press in the catch spring of lamp hous-
X
ing : with a suitable object, e.g. with a
screwdriver, and pry off lamp housing :.
Interior light without switch: open pro-
X
tective cover ?.
Press the contact spring of bulb holder ;
X
outwards and remove bulb =.
Insert new bulb =.
X
Interior light without switch: fold back
X
protective cover ?.
Align lamp housing : on the left-hand side
X
and engage.
i
Vehicles with LED lighting: if an LED is
faulty, consult a qualified specialist work-
shop.